How to disable meth? - CorvetteForum - Chevrolet Corvette Forum Discussion

Notices
C7 Forced Induction/Nitrous C7 Corvette Turbochargers, Superchargers, Pulley Upgrades, Intercoolers, Wet and Dry Nitrous Injection, Meth
Sponsored by:
Sponsored by:

How to disable meth?

Reply

 
 
 
Old 07-15-2018, 01:51 PM
  #1  
turbo87
CF Senior Member
Thread Starter
 
turbo87's Avatar
 
Member Since: Apr 2007
Location: PLATTE CITY MO
Posts: 308
Thanks: 0
Thanked 0 Times in 0 Posts
Default How to disable meth?

I have a 2014 with ecs without restrictor plate. I was going to install a 7 psi plate and disable the meth but leave it on the car. What do i need to do ? drain system and disconnect the power to the meth kit? thanks
turbo87 is offline  
Reply With Quote
Old 07-15-2018, 04:39 PM
  #2  
Patriot Six
CF Senior Member
 
Patriot Six's Avatar
 
Member Since: Jun 2016
Location: Alexandria VA
Posts: 833
Thanked 130 Times in 124 Posts
Default

If it’s an Alky Control kit, you can just turn it off using the gain **** on the controller, or disconnect the hose at the nozzle and drain the reservoir with the test button.
Patriot Six is offline  
Reply With Quote
Old 07-16-2018, 04:47 PM
  #3  
C7&7
CF Senior Member
 
C7&7's Avatar
 
Member Since: Mar 2010
Location: DFW TX
Posts: 4,823
Thanked 168 Times in 146 Posts
Default

Yea just turn the gain to 0. I'd drain it also.

Last edited by C7&7; 07-16-2018 at 04:48 PM.
C7&7 is offline  
Reply With Quote
Old 07-21-2018, 12:05 PM
  #4  
Jaycajun
CF Senior Member
 
Jaycajun's Avatar
 
Member Since: Sep 2012
Location: San Antonio, TX
Posts: 524
Thanked 22 Times in 18 Posts
Default

Per Julio at Alky Control, remove the line at the nozzle, put the line in a jug and pump out all meth, add water to the washer tank, push some water through the system to flush out the meth, and leave water in the washer tank so the pump isn't sitting dry which keeps the pump seals happy.
Jaycajun is offline  
Reply With Quote
Old 07-21-2018, 04:07 PM
  #5  
robert miller
CF Senior Member
 
robert miller's Avatar
 
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 25,515
Thanked 968 Times in 880 Posts
Default

Originally Posted by Jaycajun View Post
Per Julio at Alky Control, remove the line at the nozzle, put the line in a jug and pump out all meth, add water to the washer tank, push some water through the system to flush out the meth, and leave water in the washer tank so the pump isn't sitting dry which keeps the pump seals happy.
DO this for sure with the set up.....
robert miller is offline  
Reply With Quote
Old 07-28-2018, 10:29 AM
  #6  
turbo87
CF Senior Member
Thread Starter
 
turbo87's Avatar
 
Member Since: Apr 2007
Location: PLATTE CITY MO
Posts: 308
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks for the help
turbo87 is offline  
Reply With Quote
Old 07-29-2018, 08:14 AM
  #7  
RottenII
CF Senior Member
 
RottenII's Avatar
 
Member Since: May 2014
Location: WNY
Posts: 344
Thanked 26 Times in 23 Posts
Default

Originally Posted by Jaycajun View Post
Per Julio at Alky Control, remove the line at the nozzle, put the line in a jug and pump out all meth, add water to the washer tank, push some water through the system to flush out the meth, and leave water in the washer tank so the pump isn't sitting dry which keeps the pump seals happy.
Only thing I would do different is use the anti-freeze washer fluid instead of water. That way if you are in a cold weather climate come winter, you won't have any worries about freezing.
RottenII is offline  
Reply With Quote
 
 
 


Thread Tools
Search this Thread
Quick Reply: How to disable meth?


Sponsored Ads
Vendor Directory

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: