Machine Cray Brickyards installed - pics
Thread Starter
Race Director
Joined: Sep 2013
Posts: 11,825
Likes: 2,477
From: Ft Lauderdale
Tech Contributor
Machine Cray Brickyards installed - pics
OK here you go.. home, opti coated and I love the look. You don't like em? OK with me...this is for the guys who are thinking about them. Again, these are:
19 x 9 cray machined matte face brickyards- 1990CRB505121F70 machine face 50 offset
20 x 10.5 - 2005CRB655121F70 - machine face 65 offset
thanks to Dave Wing@Elite Roads - in Ft Lauderdale, Dave has a set of these in stock now - rear is a 11 inch - first come first served...this total package out the door with mounting and road force balancing was about $475 apiece.
19 x 9 cray machined matte face brickyards- 1990CRB505121F70 machine face 50 offset
20 x 10.5 - 2005CRB655121F70 - machine face 65 offset
thanks to Dave Wing@Elite Roads - in Ft Lauderdale, Dave has a set of these in stock now - rear is a 11 inch - first come first served...this total package out the door with mounting and road force balancing was about $475 apiece.
Last edited by Glen e; Jun 6, 2014 at 05:49 PM.
Thread Starter
Race Director
Joined: Sep 2013
Posts: 11,825
Likes: 2,477
From: Ft Lauderdale
Tech Contributor
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Racer
Joined: Apr 2014
Posts: 373
Likes: 10
From: Rye New York
wow. . .looks pretty sick glen. . .i wasn't much of a fan of the nurbs before. . .these are MUCH hotter in my opinion. . .sleek, menacing. . .and they work with the splitter and the GCM. . .my CGM is coming in any day now and i have to say, while i decided on powdercoating gloss blk instead of the brickyards, these do look hot. . .even more so i love the blked out grille and crossed flags. . .might have to have mine powdercoated too!! sweet ride, glen!
Melting Slicks
Joined: Oct 2008
Posts: 3,359
Likes: 607
OK here you go.. home, opti coated and I love the look. You don't like em? OK with me...this is for the guys who are thinking about them. Again, these are:
19 x 9 cray machined matte face brickyards- 1990CRB505121F70 machine face 50 offset
20 x 10.5 - 2005CRB655121F70 - machine face 65 offset
did I miss the cost...you said "about........."
thanks to Dave Wing@Elite Roads - in Ft Lauderdale, Dave has a set of these in stock now - rear is a 11 inch - first come first served...this total package out the fdoorwith mounting and balncing and everything was about
19 x 9 cray machined matte face brickyards- 1990CRB505121F70 machine face 50 offset
20 x 10.5 - 2005CRB655121F70 - machine face 65 offset
did I miss the cost...you said "about........."
thanks to Dave Wing@Elite Roads - in Ft Lauderdale, Dave has a set of these in stock now - rear is a 11 inch - first come first served...this total package out the fdoorwith mounting and balncing and everything was about
Thread Starter
Race Director
Joined: Sep 2013
Posts: 11,825
Likes: 2,477
From: Ft Lauderdale
Tech Contributor
this musta got cut off..about $475, I'm sure oyu can do better at a online store, but I like my wheel dealer as it's a drive in drive out situation with great guys, road force balancing and perfect fit. So I paid near retail..OK with me, I've never looked for the cheap deals vs. the total service turn key package from guys I trust. This is my 5th set of wheels From Dave and the boys...
Nice match with CG
