When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
[QUOTE=Y2KFirehawk;1601895543]I went with a Bendpak XPR-10AS-LP (asymmetrical) and loving it. Greatly appreciated all the advice from here and Garage Journal.
Have to drive my Z06 on to 1/4" boards but then very easy to place the arms and lift.
Thanks, for the reply, I also looked at the Bendpaks as my second choice due to the 4” vs 4.75” minimum pad hit.
The floor is that blue. It is a metallic epoxy. One base coat, then several coats of color and finally a clear top coat. It was the first thing I did after I bought the car, other than having the windows tinted. I love it.
I went with a Direct-Lift Pro Park 8S 4-post lift what works well for all my vehicles. It permits comfortable stacked storage of two "fun" cars ('19 C7Z and '13 GT500) under an ~11ft ceiling. IMO the minimum needed is ~10ft, but I found their Ceiling Height Calculator very useful when I shopped lifts.
Other Direct-Lift advantages include ALI-certification; 110V operation; inclusion of Drip Trays, Jack Tray, and Casters at no extra charge; and availability of a Pro Jack 3500 to permit tire/wheel/suspension work.
What model please and configuration asymmetrical or symmetrical? Thanks, I have been looking at Atlas Lifts for my C7 GS, and wasn’t sure if it would work.
It can be used asymmetrical or symmetrical. It's a nice lift! I purchased it at Greg Smith Equipment check out their website there is a ton of lift information!!!
07-24-2020, 02:36 PM
