C7 Carbon Fiber Side Skirts & Splitter, Z06 Grille, Wickerbill- SALE @ JWM
#21
Le Mans Master
I finally got around to getting the CF Stage 1 lip and Z07 side skirts installed. I'm impressed with the product and it makes the car look that much better!
The following users liked this post:
JW Motorsports (03-08-2018)
#22
Just ordered a set of side skits for my GS! Woohooo, stage 3 areo will finally be complete. Are these in stock? Wondering if they will make my next track day.
The following users liked this post:
JW Motorsports (03-08-2018)
#23
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
Your skirts will arrive before the hardware. You'll have tracking for both later or early tomorrow morning.
Thanks for the order
The following users liked this post:
rb185afm (03-08-2018)
#24
Le Mans Master
The following users liked this post:
JW Motorsports (03-09-2018)
#25
I must say I’m impressed! Already have my side skirts in hand! These are beautiful and they came packaged perfectly to avoid damage. I should have pics mounted on my car tomorrow.
The following users liked this post:
JW Motorsports (03-09-2018)
#26
The following users liked this post:
JW Motorsports (03-10-2018)
#27
Have a question. The hardware provided is to long to tap he most inward part of the side skirt. Am I supposed to get more hardware? If not, how are you attaching the inward part in the photos as right above is frame material. Also, note, the rivet holes do not line up. I’m guessing that’s on purpose to tap new holes with your hardware? And finally, one side has a large repair visible from the top side. For the price, I’m ok with it as long as it holds on the track, as it’s not visible once mounted. Do carbon repairs hold as strong?
Last edited by rb185afm; 03-11-2018 at 02:22 PM.
#28
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
Those are the correct screws. It's hard to tell exactly from the pic, but this thread below will make it simple. Your location on that one may need to be moved a bit.
He has the mounting procedure laid out for the best fit.
https://www.corvetteforum.com/forums...s-on-a-c7.html
You'll be fine with that repair.
He has the mounting procedure laid out for the best fit.
https://www.corvetteforum.com/forums...s-on-a-c7.html
You'll be fine with that repair.
Last edited by JW Motorsports; 03-11-2018 at 03:07 PM.
#29
Those are the correct screws. It's hard to tell exactly from the pic, but this thread below will make it simple. Your location on that one may need to be moved a bit.
He has the mounting procedure laid out for the best fit.
https://www.corvetteforum.com/forums...s-on-a-c7.html
You'll be fine with that repair.
He has the mounting procedure laid out for the best fit.
https://www.corvetteforum.com/forums...s-on-a-c7.html
You'll be fine with that repair.
The following users liked this post:
JW Motorsports (03-11-2018)
#30
Got her on. Used a combo of rivers and self tapping screws. It’s breaking before coming off. Looks great on!
#31
All finished.
Last edited by rb185afm; 03-11-2018 at 06:58 PM.
The following users liked this post:
JW Motorsports (03-12-2018)