Diffuser Fins
Thread Starter
Le Mans Master
Joined: Jul 2004
Posts: 5,043
Likes: 943
From: Bonney Lake Washington
Diffuser Fins
Howdy;
I am interested in a set of four diffuser fins to add to the rear facia of my 2014 Torch Red Z51 7MT Conv.. Performance Corvettes offers them in the 300 buck range but they are
not answering their phone and another set for about half that had one really bad review.
a, Any of you wise Vette people have experience adding these? And what did/do you think?
b. Any good stores you've dealt with who sell them? I've looked around a little but your wisdom would supersede what I've seen
Thanks,
Dan
I am interested in a set of four diffuser fins to add to the rear facia of my 2014 Torch Red Z51 7MT Conv.. Performance Corvettes offers them in the 300 buck range but they are
not answering their phone and another set for about half that had one really bad review.
a, Any of you wise Vette people have experience adding these? And what did/do you think?
b. Any good stores you've dealt with who sell them? I've looked around a little but your wisdom would supersede what I've seen
Thanks,
Dan
Premium Supporting Vendor
Joined: Oct 2016
Posts: 3,851
Likes: 470
From: Manassas VA
Howdy;
I am interested in a set of four diffuser fins to add to the rear facia of my 2014 Torch Red Z51 7MT Conv.. Performance Corvettes offers them in the 300 buck range but they are
not answering their phone and another set for about half that had one really bad review.
a, Any of you wise Vette people have experience adding these? And what did/do you think?
b. Any good stores you've dealt with who sell them? I've looked around a little but your wisdom would supersede what I've seen
Thanks,
Dan
I am interested in a set of four diffuser fins to add to the rear facia of my 2014 Torch Red Z51 7MT Conv.. Performance Corvettes offers them in the 300 buck range but they are
not answering their phone and another set for about half that had one really bad review.
a, Any of you wise Vette people have experience adding these? And what did/do you think?
b. Any good stores you've dealt with who sell them? I've looked around a little but your wisdom would supersede what I've seen
Thanks,
Dan
Hi Dan,
We sell these all day long, never had one complaint
ACS also make OEM parts so the fit and finish is top notch
https://www.corvettepartsandaccessor...user-fins-quad
Regards
Chip
Racer
Joined: Jun 2011
Posts: 314
Likes: 84
From: Arkansas
howdy;
i am interested in a set of four diffuser fins to add to the rear facia of my 2014 torch red z51 7mt conv.. Performance corvettes offers them in the 300 buck range but they are
not answering their phone and another set for about half that had one really bad review.
A, any of you wise vette people have experience adding these? And what did/do you think?
B. Any good stores you've dealt with who sell them? I've looked around a little but your wisdom would supersede what i've seen
thanks,
dan
i am interested in a set of four diffuser fins to add to the rear facia of my 2014 torch red z51 7mt conv.. Performance corvettes offers them in the 300 buck range but they are
not answering their phone and another set for about half that had one really bad review.
A, any of you wise vette people have experience adding these? And what did/do you think?
B. Any good stores you've dealt with who sell them? I've looked around a little but your wisdom would supersede what i've seen
thanks,
dan
Racer
Joined: Apr 2018
Posts: 304
Likes: 26
ACS PERIOD! it's the only way to fly. You get what you pay for and more with ACS, went on like a charm, looks factory the fit is so perfect. didn't need to remove diffuser either only the 4 screws underneath and I have a Z51 that has a eLSD Module right behind it on the drivers side.
Team Owner
Joined: Jan 2007
Posts: 29,065
Likes: 1,839
From: cookeville tennessee
ttt
ACS here I have put on 3 diff sets on my car & 2 other cars. These work like a dream I just paid from him to have him paint them on two diff sets & one guy we painted them. Makes the car look much better from the rear.. Robert
Team Owner
Joined: Jan 2007
Posts: 29,065
Likes: 1,839
From: cookeville tennessee
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Le Mans Master
Joined: Oct 2009
Posts: 7,397
Likes: 124
From: Frisco TX
The cheap ones are "flat black" and many uninformed C7 owners many not know that doesn't mean "carbon flash".
The ACS ones are super-expensive but I know they fit. Also I know the ACS ones comes with an installation template. I heard the cheap ones don't. Maybe they do.
I have no experience with the cheap ones other than knowing they aren't painted carbon flash. Another thing that gives me pause is that the picture on the website for the installed fins isn't the same product that they are selling you. The fins are too thin in the photo (or its been photoshopped).
I might have bought the cheap ones but they weren't available at the time I bought the ACS. But I would have had to have them painted first. End the end, would have saved $200 or so.
If anyone has experience with the cheap ones, by all means, chime in.
Advanced
Joined: Apr 2018
Posts: 52
Likes: 5
From: Bartonville Illinois
ACS Fins
[QUOTE=JGarland;1597846916]ACS only.
Do not get the cheaper ones... They are unpainted.
FYI. I have a used set of ACS fins for sale if anyone is interested.[/QUOTE
How much do you want for your fins and are they painted?
Thanks
Do not get the cheaper ones... They are unpainted.
FYI. I have a used set of ACS fins for sale if anyone is interested.[/QUOTE
How much do you want for your fins and are they painted?
Thanks
