Quick Jack 5000
Melting Slicks
Joined: Nov 2001
Posts: 2,793
Likes: 58
From: God's Country The Old Dominion
Drifting
Joined: May 2007
Posts: 1,426
Likes: 165
From: Motor City
Receive my QuickJack from Costco today. Boxes were beat to **** but Chinese corrugated materials are **** to begin with, and I'm sure UPS was very gentle with them 
SETUP VIDEO
- No instructions as I'm sure they came out of the box that was missing 1 sq ft of it's side (thanks UPS), but the video was all that was needed
- Setup is very easy, basically didn't need the instructions. It's not like you can put the fittings in the wrong spot.
- Mine came with the new updated pump that has a self venting fill plug on the tank. (this was not covered in the video so threw me off a bit)
- Tank took 2 quarts to get things running and then a small top off after running it up and down a few times. So the 2.1qts is probably spot on.
- I had to take the Schrader valves out and rewrap the teflon tape. Apparently on the other side of the world they wrap teflon tape the opposite direction.
SETUP VIDEO
Pro
Joined: Mar 2016
Posts: 606
Likes: 76
From: Helendale CA
I received boxes 1 and 2 today and they were beat to no end. One of the jacks has deep scratches all the way to the metal and very little left of the warning label on the end of the jack. Jesus Christ what in the hell is UPS doing? And leave it to UPS to deliver 2 of the 3 boxes today and box 3 coming on Monday. All 3 boxes shipped on the same day.
Racer
Joined: Jul 2018
Posts: 307
Likes: 72
I received boxes 1 and 2 today and they were beat to no end. One of the jacks has deep scratches all the way to the metal and very little left of the warning label on the end of the jack. Jesus Christ what in the hell is UPS doing? And leave it to UPS to deliver 2 of the 3 boxes today and box 3 coming on Monday. All 3 boxes shipped on the same day.
Racer
Joined: Dec 2001
Posts: 340
Likes: 127
From: Cincinnati OH
I received boxes 1 and 2 today and they were beat to no end. One of the jacks has deep scratches all the way to the metal and very little left of the warning label on the end of the jack. Jesus Christ what in the hell is UPS doing? And leave it to UPS to deliver 2 of the 3 boxes today and box 3 coming on Monday. All 3 boxes shipped on the same day.
Lurker
Joined: Nov 2018
Posts: 2,034
Likes: 644
From: Denton, TX
St. Jude Donor '19-'20
Don't get me started on the boys in the big brown bread truck......
My x pipe literally coming from 30 miles across town has never shown after 16 days.....my wheels are due in today from them and I'm nervous as a ho in church.....
On to the 5000......I'm thinking the 7000 so I can do brakes/tire rotations on my Silverado.....not a Costco member so does anyone know if QuickJack, or anyone else runs a Xmas sale?
To those getting theirs recently, congrats, hope all your components show up and y'all get some lift time!
My x pipe literally coming from 30 miles across town has never shown after 16 days.....my wheels are due in today from them and I'm nervous as a ho in church.....
On to the 5000......I'm thinking the 7000 so I can do brakes/tire rotations on my Silverado.....not a Costco member so does anyone know if QuickJack, or anyone else runs a Xmas sale?
To those getting theirs recently, congrats, hope all your components show up and y'all get some lift time!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Instructor
Joined: Dec 2016
Posts: 159
Likes: 47
From: Upstate NY
I got mine through Home Depot and opted to pick them up in store.
My thought was if they were beat up I would refuse them.
They arrived in perfect condition and they even loaded them in my truck for me.
As for lifting I use 1 rubber block and a hockey puck.
I bought a bag of a dozen pucks on Ebay for about a buck apiece.
Use them anytime I lift with a floor jack or quick jack.
My thought was if they were beat up I would refuse them.
They arrived in perfect condition and they even loaded them in my truck for me.
As for lifting I use 1 rubber block and a hockey puck.
I bought a bag of a dozen pucks on Ebay for about a buck apiece.
Use them anytime I lift with a floor jack or quick jack.
Pro
Joined: Jul 2020
Posts: 741
Likes: 329
2023 C5 of the Year Finalist - Unmodified
2020 C5 of the Year Finalist - Unmodified
I just use the rubber blocks that come with it on my C5 with my 5000slx I got a couple years ago.
Ended up buying the pinch-weld blocks to use for the other car I have.
Both work great!
Ended up buying the pinch-weld blocks to use for the other car I have.
Both work great!
Instructor
Joined: Apr 2023
Posts: 190
Likes: 124
From: Pacific Northwest
I have a set of snap-in pucks from Amazon that I use with my C7. Used the same pucks on two different C7's and they work great. I use the tall blocks on the QJ. I use the **** out of that thing. Some times I just lay under the car and admire the engineering 
Burning Brakes
Joined: Sep 2009
Posts: 918
Likes: 266
From: Ft. Worth Tx.
Same here
Mine was delivered to the same address different street name about 5 blocks away. The lady called me. I started to go get it. When I out of the driveway here came the UPS truck. Some how he realized what he had done and went back and got it. Just like everyone else, the boxes were destroyed. I ordered mine right from the company. They need better packaging.