Touchup Paint
Thread Starter
Drifting
Joined: Feb 2004
Posts: 1,907
Likes: 554
From: Scottsdale AZ
Touchup Paint
Touching up a small scrape on my ACS Splitter, carbon flash. Using the AC Delco Lacquer Touchup Paint. Looks dull, do I need to hit it with clear-coat? I was assuming since it was a touchup paint it was mixed in.
Melting Slicks
Joined: Jul 2013
Posts: 2,088
Likes: 995
From: Orwigsburg Pa
Not sure how bad the scrape is. I bought ACS composite Rockguard kit and it came with the bottle of carbon flash touch up paint. You brush it on and really matches. It does for small nicks. Not sure if you can use it for your splitter. They might carry it in a spray.
Thread Starter
Drifting
Joined: Feb 2004
Posts: 1,907
Likes: 554
From: Scottsdale AZ
Did the same? Just buffed it? I just went out a bought a can of clear acrylic to spray on it. Was going to get lacquer but the sales guy talked me out of it - said it was super hard to use.
Never did this before so the painting is an experiment for me.
Thoughts?
Never did this before so the painting is an experiment for me.
Thoughts?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Jun 2002
Posts: 4,757
Likes: 2,508
From: Buckeye, AZ
St. Jude Donor '12-'13
It is not shown under C7 Corvettes for some odd reason. Search on color code 58U and it will come up. It is used by a number of brands and manufacturers. I have used it on many under hoid parts.