Engine compartment
Popular Reply
May 1, 2019, 08:39 PM
Team Owner
Joined: Aug 2007
Posts: 136,140
Likes: 2,432
From: I live my life by 2 rules. 1) Never share everything you know. 2)
St. Jude Donor '11-'12-'13, '16-'17-'18
Pulling the motor down makes it easier to get into all those nooks and crannies
Former Vendor
Joined: Oct 2018
Posts: 591
Likes: 103
From: San Leandro, CA
I just used detail spray, but spray your microfiber towel first and not the engine compartment. Doesn't leave anything behind and doesn't cause any issues with the engine heat.
Last edited by Steve Garrett; May 1, 2019 at 09:00 PM.
Pro
Joined: Feb 2019
Posts: 630
Likes: 384
From: Florida
After each time I drive the car I do a quick touch up of the engine compartment. It only takes a couple of minutes and all the engine compartments of all my vehicles look new even after years and lots of miles: The key here is to never let the compartment get dirty. Here are the steps I use:
* First, I brush as much dust off as possible with a large soft bristle paint brush. Works great for electrical connectors and other parts with lots of cracks and crevices.
* If needed, I then use my shop vac for hard to reach spots with the crevice tool and brush as necessary.
* Last, if needed, I wipe down everything with 303 Speed Detailer. The good thing about this spray is it works well for both metal and plastic parts (repels moisture). The best I have ever used. As Tim Boone said, I spray the applicator cloth and not the engine.
* First, I brush as much dust off as possible with a large soft bristle paint brush. Works great for electrical connectors and other parts with lots of cracks and crevices.
* If needed, I then use my shop vac for hard to reach spots with the crevice tool and brush as necessary.
* Last, if needed, I wipe down everything with 303 Speed Detailer. The good thing about this spray is it works well for both metal and plastic parts (repels moisture). The best I have ever used. As Tim Boone said, I spray the applicator cloth and not the engine.
Last edited by ShadowGray19; May 1, 2019 at 08:26 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Administrator
Joined: Mar 2001
Posts: 368,297
Likes: 24,776
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
I use a Swiffer (or equivalent) duster to get the loose dirt removed, then use a moist Absorber to wipe down the components. If there are some greasy spots, a little Simple Green on a rag takes care of it. I do not use any spray that may leave any residue on the parts.
Banned Scam/Spammer
Joined: Jan 2019
Posts: 346
Likes: 131
rodney123456;
Good question.
*Always start with a cold engine.*
Spray list:
1) Simple green.
2) WD-40.
3) Engine detail spray.
4) High temp grease.
5) Water.
Caveat: "Wet engines equal electrical problems". Water will get into wiring harnesses, connectors and other places you cannot remove it!
Solution: Cover the alternator and fuse box with plastic?
(Hand cleaning will take care of most everything if you keep after it).
Finish by applying high temp grease to hood latches and hinges.
Many thanks,
Ray
Good question.
*Always start with a cold engine.*
Spray list:
1) Simple green.
2) WD-40.
3) Engine detail spray.
4) High temp grease.
5) Water.
Caveat: "Wet engines equal electrical problems". Water will get into wiring harnesses, connectors and other places you cannot remove it!
Solution: Cover the alternator and fuse box with plastic?
(Hand cleaning will take care of most everything if you keep after it).
Finish by applying high temp grease to hood latches and hinges.
Many thanks,
Ray
