Programming key fob
Thread Starter
5th Gear
Joined: Jan 2020
Posts: 5
Likes: 0
Programming key fob
I have a 2015 C7 and have the original #1 key fob, the dealer had to order me another key fob and it’s programmed for the car but won’t recognize the #2 seat settings. How do I make this new key fob the #2 key fob so it moves the seat to the #2 settings
Safety Car
Joined: Dec 2012
Posts: 3,875
Likes: 1,875
From: St. Louis Metro East IL
Your fobs are #1 and #3. If you want to make them #1 and #2 you will need to follow the long procedure in your owner's manual
Page 2-6 in your manual "Programming without a Recognized Transmitter" (link to manual is up in the Sticky Threads)
or in this thread:
https://www.corvetteforum.com/forums...s-and-rke.html
Before you start anything, make sure the metal key will open your trunk / hatch. Also lower your windows just in case.
Take your time and follow the instructions. The timing in the instructions is important.
GL
Ron
Page 2-6 in your manual "Programming without a Recognized Transmitter" (link to manual is up in the Sticky Threads)
or in this thread:
https://www.corvetteforum.com/forums...s-and-rke.html
Before you start anything, make sure the metal key will open your trunk / hatch. Also lower your windows just in case.
Take your time and follow the instructions. The timing in the instructions is important.
GL
Ron
Last edited by RonC7; Jan 26, 2020 at 09:47 PM.
Thread Starter
5th Gear
Joined: Jan 2020
Posts: 5
Likes: 0
Your fobs are #1 and #3. If you want to make them #1 and #2 you will need to follow the long procedure in your owner's manual
Page 2-6 in your manual "Programming without a Recognized Transmitter" (link to manual is up in the Sticky Threads)
or in this thread:
https://www.corvetteforum.com/forums...s-and-rke.html
Before you start anything, make sure the metal key will open your trunk / hatch. Also lower your windows just in case.
Take your time and follow the instructions. The timing in the instructions is important.
GL
Ron
Page 2-6 in your manual "Programming without a Recognized Transmitter" (link to manual is up in the Sticky Threads)
or in this thread:
https://www.corvetteforum.com/forums...s-and-rke.html
Before you start anything, make sure the metal key will open your trunk / hatch. Also lower your windows just in case.
Take your time and follow the instructions. The timing in the instructions is important.
GL
Ron
thanks, guess I know what I’ll be trying today
