Program remote on C7
Thread Starter
4th Gear
Joined: Apr 2020
Posts: 4
Likes: 0
Program remote on C7
I have a 2014 and when I put the car away for the winter my two remotes worked. This spring only one remote works. I have changed remote battery twice and to no avail. The battery I installed had the hatch marks on the back. However is it possible that I lost the program in the remote and if that was the case can I reprogram the non working remote. thank you.
Safety Car
Joined: Dec 2012
Posts: 3,841
Likes: 1,856
From: St. Louis Metro East IL
There is NO program in the remote. All of the "smarts" are in the car. First - double check that the fob battery is good - above 3 volts. New does not automatically mean good.
If you decide to replace the fob be aware that there are 4 different possible fobs for each model year range (combinations of auto/man and couple/vert). Fobs are the same for model years 2014-2015 and for 2016-2019.
The programming procedures are in the owner's manual and in the Sticky notes. If you have a 2LT or 3LT and wish to maintain memory features you'll need to use the long procedure. The short procedure will make the new fob #3 which does not have memory features assigned.
Ron
If you decide to replace the fob be aware that there are 4 different possible fobs for each model year range (combinations of auto/man and couple/vert). Fobs are the same for model years 2014-2015 and for 2016-2019.
The programming procedures are in the owner's manual and in the Sticky notes. If you have a 2LT or 3LT and wish to maintain memory features you'll need to use the long procedure. The short procedure will make the new fob #3 which does not have memory features assigned.
Ron
Moderator emeritus
Joined: Jun 2001
Posts: 18,599
Likes: 3,951
From: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
2015 C7 of the Year Finalist
I have a 2014 and when I put the car away for the winter my two remotes worked. This spring only one remote works. I have changed remote battery twice and to no avail. The battery I installed had the hatch marks on the back. However is it possible that I lost the program in the remote and if that was the case can I reprogram the non working remote. thank you.
Elmer
Pro
Joined: Apr 2017
Posts: 592
Likes: 314
From: Chesterfield Twp., Michigan
I had a similar problem with the remotes for my garage door opener. One just did not work. I checked the voltage of the battery for the non-functioning remote and it was above 3 volts (same battery as the C7 remote - CR2032). In desperation, I replaced the battery and viola, it works! The kicker is that the new battery actually tested at slightly lower voltage on my multi-meter than the battery that I replaced. Go figure!
Administrator
Joined: Mar 2001
Posts: 368,063
Likes: 24,731
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Ron - thanks for the very useful information.
