Alignment
Melting Slicks
Joined: Aug 2014
Posts: 2,587
Likes: 873
If not going to track it, I'd 0 out the camber as much as possible and run 0 toe on front and 0.05 in toe in on rear or even 0 there if not going to hot foot it hard.
Caster can be set to stock values for front and back or dsc values if you want.
This setup will net you the max street mileage you can get.
Caster can be set to stock values for front and back or dsc values if you want.
This setup will net you the max street mileage you can get.
Last edited by SladeX; Aug 8, 2021 at 03:17 PM.
