When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I purchased these 4 years ago and they’ve been perfect. Yes I know putting $100 skirts on a new $$$ C7 is sacrilegious (I even put the $100 Amazon splitter on too) but so far so good.
I purchased these 4 years ago and they’ve been perfect. Yes I know putting $100 skirts on a new $$$ C7 is sacrilegious (I even put the $100 Amazon splitter on too) but so far so good.[/QUOTE]
Sweet!
How much clearance in inches do you have after putting on the splitter? Are you still able to go past the curb without hitting?
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
The side skirts on my car were bought from RPI Designs - a little slow getting them but they fit well and look great on the car. Sorry, I do not have a better pic right now. Can get one if you want to see the full side skirt.
How much clearance in inches do you have after putting on the splitter? Are you still able to go past the curb without hitting?
Thanks in advance![/QUOTE]
5 1-2 inches on splitter
4 1/2 inches on side skirts.
Being a cheap butt I don’t have a camera so I’m very careful when pulling up to park. I’ve never pulled up far enough to have gone over a curb, I stop short. I don’t think I’d clear most curbs anyway. It’s low.
How much clearance in inches do you have after putting on the splitter? Are you still able to go past the curb without hitting?
Thanks in advance!
5 1-2 inches on splitter
4 1/2 inches on side skirts.
Being a cheap butt I don’t have a camera so I’m very careful when pulling up to park. I’ve never pulled up far enough to have gone over a curb, I stop short. I don’t think I’d clear most curbs anyway. It’s low.[/QUOTE]
"They are $100, Hecasa brand." Really? Why take the risk when ones of known quality is available? Do you really want to hassle with what they may be like, meaning how made and how they install? But, perhaps you can be the guinea pix and let us know how it turns out with these.
I went with RPI Designs C7-1055 in January 2017 for our 2016 Z51 & have been very happy with them. Sure there are many other good ones on the market, however the RPI unit is what I have experience with.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.
