Stainless Works Stepped Headers
Thread Starter
7th Gear
Joined: May 2014
Posts: 7
Likes: 0
Stainless Works Stepped Headers
So I'm looking to get headers on my C7 and have been looking into the stainless works stepped headers. I have not been able to find a single dyno on them though.
Has anyone installed them on their car and have some first hand impressions. I had the stainless works catback on my V coupe and loved the sound but I want to actually make some power on my corvette not just sound. The fact that they are about $300 cheaper than the American racing headers is a plus also.
Has anyone installed them on their car and have some first hand impressions. I had the stainless works catback on my V coupe and loved the sound but I want to actually make some power on my corvette not just sound. The fact that they are about $300 cheaper than the American racing headers is a plus also.
Former Vendor
Joined: Dec 2011
Posts: 1,475
Likes: 29
From: Salt Lake City Utah
Haven't had a chance to install any on a C7 yet, but we're looking forward to it. We've used them on plenty of other applications over the years. Their fitment and workmanship is very good and they make great power.
Feel free to call, PM or email me anytime with questions or pricing and we'll be happy to help you out with set.
Best regards,
Tyler
888-308-6007
Feel free to call, PM or email me anytime with questions or pricing and we'll be happy to help you out with set.
Best regards,
Tyler
888-308-6007
Pro
Joined: Mar 2008
Posts: 664
Likes: 6
From: Kearney Nebraska
Ive installed and tuned a few of the 1.875" headers on the C7 for some friends
Average gains with a calibration on the stock paper air filter are 20-30whp and 30-35wtq..
Still have a few of the 1.875" setting in the storage corner
Here's dyno results with the Stainless Works 1.875" Off-road Xpipe:
http://forums.corvetteforum.com/c7-t...f-boltons.html
Should be a Drive by video too.
Average gains with a calibration on the stock paper air filter are 20-30whp and 30-35wtq..
Still have a few of the 1.875" setting in the storage corner
Here's dyno results with the Stainless Works 1.875" Off-road Xpipe:
http://forums.corvetteforum.com/c7-t...f-boltons.html
Should be a Drive by video too.
Last edited by 06x6spdGTO; Aug 27, 2014 at 11:29 AM.
Thread Starter
7th Gear
Joined: May 2014
Posts: 7
Likes: 0
Ive installed and tuned a few of the 1.875" headers on the C7 for some friends
Average gains with a calibration on the stock paper air filter are 20-30whp and 30-35wtq..
Still have a few of the 1.875" setting in the storage corner
Here's dyno results with the Stainless Works 1.875" Off-road Xpipe:
http://forums.corvetteforum.com/c7-t...f-boltons.html
Should be a Drive by video too.
Average gains with a calibration on the stock paper air filter are 20-30whp and 30-35wtq..
Still have a few of the 1.875" setting in the storage corner
Here's dyno results with the Stainless Works 1.875" Off-road Xpipe:
http://forums.corvetteforum.com/c7-t...f-boltons.html
Should be a Drive by video too.
