When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have an external 12 volt accessory that draws approx. 10 amps max via two small (+ fused) squeeze clips, Is there an easy/obvious location under the hood OR do I have to access the battery in the rear?
There is an accessory power location available under a plastic cover attached at the rear of the front fuse box (between the fusebox and the firewall). Many people use a threaded stud just in front of the alternator for a ground.
There is an accessory power location available under a plastic cover attached at the rear of the front fuse box (between the fusebox and the firewall). Many people use a threaded stud just in front of the alternator for a ground.
There is no fuse on that cable since its providing all the power to the fuse block. If you run an accessory off that, make sure you add a fuse to the wire.
There is an accessory power location available under a plastic cover attached at the rear of the front fuse box (between the fusebox and the firewall). Many people use a threaded stud just in front of the alternator for a ground.
Thank you, sounds like what I am looking for, I'll check it out.
There is no fuse on that cable since its providing all the power to the fuse block. If you run an accessory off that, make sure you add a fuse to the wire.
Appreciate the warning, my + line is fused right off the clip. Lighter socket not an option since I am using clips which is why I need to go underhood or battery.