Camshaft replace instructions
08-03-2016, 02:44 PM
#1
Melting Slicks
Thread Starter
Member Since: Nov 2004
Location: Tinker till it blows... then back it off a notch, maybe!!
Posts: 2,715
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08
Camshaft replace instructions
does anyone have a link to ' how to swap camshaft in LT1 ? torque specs, etc
TIA
TIA
08-03-2016, 04:51 PM
#2
Former Vendor
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
FYI....what was an easy car to work on with the C5/6 cars...is now not so much fun. We built a few special tools here in the shop to do the cars a little quicker but it still takes a bit more time than the older cars.
What really gets me is the lack of gaskets. Something that was pretty fool proof on the other cars has all been replaced by silicone.
Last edited by Anthony @ LGMotorsports; 08-03-2016 at 04:52 PM.
08-03-2016, 11:11 PM
#3
Melting Slicks
Thread Starter
Member Since: Nov 2004
Location: Tinker till it blows... then back it off a notch, maybe!!
Posts: 2,715
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08
hey Anthony....I already have that bookmarked, thanks
I am looking for something a bit more detailed, just to be sure that I have everything that I need, tool wise, etc.
any chance that the injectors w/ rails will pull out w/o $300 worth of tools?
thx
I am looking for something a bit more detailed, just to be sure that I have everything that I need, tool wise, etc.
any chance that the injectors w/ rails will pull out w/o $300 worth of tools?
thx
