CEL after installing cam?
Thread Starter
Instructor
Joined: Dec 2015
Posts: 239
Likes: 12
From: Rancho Cucamonga California
Which shop performed the installation and who is your tuner? Since the shop that performed the installation differs from the tuner, I hope that the "blaming game" does not ensue. Good luck!
PS: You are in great hands with Ben and Cody attempting to assist, especially with the both of them coming together.
PS: You are in great hands with Ben and Cody attempting to assist, especially with the both of them coming together.
Thread Starter
Instructor
Joined: Dec 2015
Posts: 239
Likes: 12
From: Rancho Cucamonga California
Btw
We fired her up today after not being turned on since Saturday and it did take slightly longer to start but it wasn't anything crazy. Small backfires as it started up but nothing too loud or crazy. Since the car was cold, initial idle was kind of rough but when it warmed up it idled nearly perfect (probably because of the slight tuning that was done) I didn't see any CEL but the tech did say they are intermittent, usually every second start after sitting for hours. We'll see what he sees tomorrow.
Thread Starter
Instructor
Joined: Dec 2015
Posts: 239
Likes: 12
From: Rancho Cucamonga California
Finally!!!!
They finally fixed the dumb issue. They removed the timing chain cover and turns out there was a sensor at the bottom (off what I don't know, I assume cover) that wasn't seated properly. They're sealing her up and should be on the way to the dyno soon. Thank you very much for the help guys! I really appreciate it. If any of you are ever in SoCal I'll buy you a drink.
