clicking noise
Thread Starter
Intermediate
Joined: Apr 2017
Posts: 30
Likes: 9
From: vancouver
clicking noise
been having a nightmare of a time with a clicking noise comming from the rear passenger wheel when i get on the throttle or let off in any gear 1 click usualy but its more noticeable in 1st 2nd and reverse clutch out while moving once you give it more throttle and it gets under load itll click and then if you let off the throttle itll click agin. After multiple trips to the dealership they have said its the reverse lockout solenoid. Has anyone else with a c7 experienced this, i have my doubts this is the issue?
Last edited by psd_24s; Jul 2, 2017 at 03:20 AM.
Instructor
Joined: Dec 2007
Posts: 225
Likes: 25
From: MO
There is a TSB for a clicking sound due to loose axle nuts. I had a clicking noise coming from my passenger rear wheel too on my 14 Stingray. It would click when moving from a stand still or reverse. I found somewhere on this forum there are two causes for this, either brake rotor seating areas needing cleaning or the axle nuts needing replacement and torqued to 184 ft pounds.
I took mine to the dealer and they 1St tried the cleaning but that didn't solve it so they replaced the nuts. Problem solved!
I took mine to the dealer and they 1St tried the cleaning but that didn't solve it so they replaced the nuts. Problem solved!
Last edited by SilverFish; Jul 4, 2017 at 07:11 AM.
