When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Shop our Full Line Up of ACS Composite C7 Corvette Parts and
Accessories. Get the very best for your C7 Corvette Stingray,
Grand Sport, Z06 and ZR1. Each part is designed and engineered
to be a perfect fit. Select from Raw, Satin Black or Carbon Flash.
I can't speak highly enough about ACS. I had an issue with one of the side skirts I ordered from them. It didn't think it would bother me so I went ahead & installed them. After install it just bugged me. Called them up & explained my concern. In all rights since I installed them they had no reason to help me. In the end, they sent me a special run side skirt with no mounting holes pre drilled so that I could match the holes of the skirt I was removing. There's not to many companies that would do that. Fit & finish is A+.
I can't speak highly enough about ACS. I had an issue with one of the side skirts I ordered from them. It didn't think it would bother me so I went ahead & installed them. After install it just bugged me. Called them up & explained my concern. In all rights since I installed them they had no reason to help me. In the end, they sent me a special run side skirt with no mounting holes pre drilled so that I could match the holes of the skirt I was removing. There's not to many companies that would do that. Fit & finish is A+.
Has anyone tried the ACS front undertray with a stock GS Level 2 splitter? Does it fit? Or only with their in house splitter...they look just like stock GS L2
Has anyone tried the ACS front undertray with a stock GS Level 2 splitter? Does it fit? Or only with their in house splitter...they look just like stock GS L2
I can only tell you this for sure. My 2019 Z06 Stage 2 aero suffered a badly shattered front splitter and the bottom undertray cracked with a hole from road debris. I ordered ACS front splitter with their undertray and it was a perfect fit replacement for those two GM components. But ACS warns that the ACS undertray is only compatible with the ACS splitter and vice versa. You cannot mate a GM component to an ACS part when it comes to the splitter and undertray. I suspect this is true for your GS as well.
I can only tell you this for sure. My 2019 Z06 Stage 2 aero suffered a badly shattered front splitter and the bottom undertray cracked with a hole from road debris. I ordered ACS front splitter with their undertray and it was a perfect fit replacement for those two GM components. But ACS warns that the ACS undertray is only compatible with the ACS splitter and vice versa. You cannot mate a GM component to an ACS part when it comes to the splitter and undertray. I suspect this is true for your GS as well.