New FOB Programming
Thread Starter
Racer
Joined: Feb 2011
Posts: 305
Likes: 7
New FOB Programming
Hello, I have a 2014 stingray. I brought it in two have a new fob programmed since I lost original. Older tech in a country dealership said he could not communicate with the ECM.under the right fender. Can any one shed some light
on what might be wrong why he could not program. The car is on a trailer in Park and I can't get it into Neutral to get it off. Thank you
on what might be wrong why he could not program. The car is on a trailer in Park and I can't get it into Neutral to get it off. Thank you
Moderator emeritus
Joined: Jun 2001
Posts: 18,599
Likes: 3,951
From: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
2015 C7 of the Year Finalist
Do you have a key? You need a key to do the programmomg of the FOBs. You can get a key from the dealer with a VIN of the car and proof of ownership.
ONce you have the key the will open the rear trunk/hatch, then follow the long program in these instructions.
https://www.corvetteforum.com/forums...rogramming.pdf
Elmer
ONce you have the key the will open the rear trunk/hatch, then follow the long program in these instructions.
https://www.corvetteforum.com/forums...rogramming.pdf
Elmer
Burning Brakes
Joined: Jan 2019
Posts: 954
Likes: 376
From: Louisiana
Moderator emeritus
Joined: Jun 2001
Posts: 18,599
Likes: 3,951
From: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
2015 C7 of the Year Finalist
Yup...
To program the FOBs you must have a functioning key to turn the lock above the license plate.
Owner's Manual ---> https://assets.gm.com/manuals/chevro...tte_owners.pdf
Elmer
