Engine Design Software
Thread Starter
Race Director
Joined: Apr 2000
Posts: 15,344
Likes: 4,007
From: Texas
Engine Design Software
Back in the day.....damn I'm getting old....there used to be a variety of engine design software packages. You could model bore, stroke, rod length, static and dynamic compression, ignition timing, all the cam specs, etc and come up with an engine design. It was great for not only peak power determination but also changing the shape of the hp and torque curves.
Does anyone know of something similar that exists in this day in age? Ideally it'd be for Gen V engines but I suspect that may be a bridge too far.
Does anyone know of something similar that exists in this day in age? Ideally it'd be for Gen V engines but I suspect that may be a bridge too far.
Instructor
Joined: Dec 2016
Posts: 156
Likes: 45
From: Upstate NY
Try this.
Performance Trends
I have used an older version of this with great results.
If your input data is good the output to real world dyno results are very close.
Performance Trends
I have used an older version of this with great results.
If your input data is good the output to real world dyno results are very close.
Thread Starter
Race Director
Joined: Apr 2000
Posts: 15,344
Likes: 4,007
From: Texas
Try this.
Performance Trends
I have used an older version of this with great results.
If your input data is good the output to real world dyno results are very close.
Performance Trends
I have used an older version of this with great results.
If your input data is good the output to real world dyno results are very close.
Administrator
Joined: Mar 2001
Posts: 367,271
Likes: 24,567
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Very cool software that is available.
