Key
Le Mans Master
Joined: Jun 2002
Posts: 5,370
Likes: 64
From: Yo momma's house!
From memory I don't think anyone else can cut them. My local dealer parts guy said if I have a cut key he could use to copy from he'd cut it for free. That was pretty cool of him. Might call some dealers and see if they would do the same deal. Can't be very expensive even if they charge. When you call don't ask for service, go right to the parts counter.
Le Mans Master
Joined: Jun 2002
Posts: 5,370
Likes: 64
From: Yo momma's house!
We don't know what your aftermarket cheapo amazon key is made of, if it is steel instead of something softer, it will break our tooling, not worth it for a $20 cut.
Racer
Joined: Mar 2025
Posts: 292
Likes: 250
From: OH
I just found out today that my extended warranty under endurance pays up to $500 for the replacement of a key. So, I got to take my fob that I got for $106 from GM parts and return that. One of the requirements of the extended warrant is that I use a dealer for the fob and the programming. That's going to be about $420. But the company said that I should have my reimbursement within 7 to 10 business days for once they get the claim faxed to them. Sounds good to me. I won't be out of any money for an extra fob and key.
Team Owner
Joined: Jul 2004
Posts: 28,181
Likes: 3,173
From: Hartford WI
I just found out today that my extended warranty under endurance pays up to $500 for the replacement of a key. So, I got to take my fob that I got for $106 from GM parts and return that. One of the requirements of the extended warrant is that I use a dealer for the fob and the programming. That's going to be about $420. But the company said that I should have my reimbursement within 7 to 10 business days for once they get the claim faxed to them. Sounds good to me. I won't be out of any money for an extra fob and key.
Team Owner
Joined: Jul 2004
Posts: 28,181
Likes: 3,173
From: Hartford WI
I don't think we should look at getting a return on the investment. Warranty is not for making money. It is there to mitigate or control any losses incurred. I pay $5000 for a warranty and to get a reasonable return, it would have to pay for more than $5000 to justify my "investment" or what would 4he point be? It also doesn't pay for any inconvenience. I'm good if it doesn't pay for anything since it means I am not inconvenienced with breakdown issues.
Thread Starter
Le Mans Master
Joined: Jun 2019
Posts: 5,225
Likes: 2,017
From: Loveland
I got the key cutter set up correctly. I purchased 4 new blanks. I got the new key cut and it opens the trunk. So back to where I started. If anybody wants an emergency key cut, let me know. I prefer to do this in person, locally. I will only charge you $5 for the blank, only if it works. Extra at your discretion.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
7 Bolt-On Upgrades From Extreme Online Store to Level Up Your C6 Corvette
Pouria Savadkouei
How Likely Are These Five 2027 Corvette Rumors to Be True?
Brett Foote
9 Best Corvettes You Can Buy for Half Price (& 1 You Should NEVER Buy!)
Joe Kucinski
8 Very Best Corvettes of Amelia Island 2026
Joe Kucinski
Top 10 WORST Corvette Engineering Failures of All Time!
Joe Kucinski
10 Records the C8 Corvette Generation Has SMASHED (& 1 Glaring Failure)
Joe Kucinski
7 Wildest Corvette Concepts Ever Made
Brett Foote
Team Owner
Joined: Jul 2004
Posts: 28,181
Likes: 3,173
From: Hartford WI
I got the key cutter set up correctly. I purchased 4 new blanks. I got the new key cut and it opens the trunk. So back to where I started. If anybody wants an emergency key cut, let me know. I prefer to do this in person, locally. I will only charge you $5 for the blank, only if it works. Extra at your discretion.
Pro
Joined: Oct 2008
Posts: 705
Likes: 24
I got the key cutter set up correctly. I purchased 4 new blanks. I got the new key cut and it opens the trunk. So back to where I started. If anybody wants an emergency key cut, let me know. I prefer to do this in person, locally. I will only charge you $5 for the blank, only if it works. Extra at your discretion.
Racer
Joined: Mar 2025
Posts: 292
Likes: 250
From: OH
I should do the same thing. I'm set on keys for the Corvette now. But, I need key fobs for the Dodge Charger and the Ram. I have extra keys but they do not work. Well I have one RAM key that works. If I sell the Dodge Charger, that would be a good selling point to have two programmed keys that work. If you don't mind me asking how much did the programmer and key cutter cost?
Pro
Joined: Oct 2008
Posts: 705
Likes: 24
I should do the same thing. I'm set on keys for the Corvette now. But, I need key fobs for the Dodge Charger and the Ram. I have extra keys but they do not work. Well I have one RAM key that works. If I sell the Dodge Charger, that would be a good selling point to have two programmed keys that work. If you don't mind me asking how much did the programmer and key cutter cost?
Racer
Joined: Mar 2025
Posts: 292
Likes: 250
From: OH
The KM100 was around 300. The key cutting machines were around 170 each. I think it's around $300 to get a key & fob cut and programmed at a Dodge Dealer. I've cut and programmed keys for my '17 Hellcat Challenger, 05 Ram 1500, and 2011 Jeep Wrangler, so they've already paid for themselves.
Pro
Joined: Oct 2008
Posts: 705
Likes: 24
Thread Starter
Le Mans Master
Joined: Jun 2019
Posts: 5,225
Likes: 2,017
From: Loveland
Pro
Joined: Oct 2008
Posts: 705
Likes: 24
I also bought one of these:
https://ebay.us/m/l9rjuY
The vertical one just doesn't work well with traditional style keys.
https://ebay.us/m/l9rjuY
The vertical one just doesn't work well with traditional style keys.