C7 Z06 Corvette Painted or Carbon Fiber Lower Grille at RPI Designs
#1
Platinum Supporting Vendor
Thread Starter
C7 Z06 Corvette Painted or Carbon Fiber Lower Grille at RPI Designs
C7 Z06 Corvette Front Grille
Painted Body Colors or Carbon Fiber
Are you looking to change the look of your C7 Corvette Stingray?
Would you like to give it the Z06 look?
Here at RPI, we have you covered. You can order a C7 Z06 Corvette front grille in plain black plastic, any C7 body color or hydrocarbon fiber.
If you are looking to purchase one painted or hydrocarbon fiber, please allow additional time as we make the order.
Item #
C7-Z900 COUPON CODE
RPICHRIS5
at checkout for an Immediate Discount.
Website Link :
http://www.rpidesigns.com/shop/item.aspx?itemid=5043
__________________
Last edited by RPIDON; 02-28-2020 at 07:28 PM.
#4
Platinum Supporting Vendor
Thread Starter
#6
Platinum Supporting Vendor
#8
Platinum Supporting Vendor
#11
Platinum Supporting Vendor
Last edited by RPI Designs; 12-08-2015 at 08:48 AM.
#14
Platinum Supporting Vendor
We can do these for the camera equipped grill but the cost will change if you want the painted grille to come with the cameras installed. Or you can take the cameras out of your old grille and install it in the painted grille. The grilles are the same other than the cameras. Give Don a call if you have any other questions.
#17
Platinum Supporting Vendor
Thank you for the orders! Use coupon code LANA5 to save 5% off your order!
#18
Platinum Supporting Vendor
Thread Starter
Thanks for Checking us Out!! Use Coupon Code RPICHRIS5 for Immediate Savings!!!
#19
Melting Slicks
Member Since: Nov 2000
Location: Merritt Island Florida
Posts: 2,225
Received 241 Likes
on
145 Posts
OEM Z06 grille
Do you know if this grille is same material as OEM ?
And do you know if i can slightly change shape by applying heat to it ?
Putting on an aftermarket front and need to "bend" it slightly 3/4 inch center
TIA
#20
Platinum Supporting Vendor
Thread Starter
Yes, this grille is the same as the original. As far as the heat goes, I really couldn't say for sure because I haven't tried it. It is plastic though so I would think it could bend some if you take time and are careful.
Let me know if you have any other questions.
Thanks,
Chris
The following users liked this post:
Z06Norway (02-25-2019)