Drag Pack
Thread Starter
Melting Slicks
Joined: Mar 2001
Posts: 3,251
Likes: 48
From: Parkland Florida
Corvette Challenge Champ-01
Dragster Challenge Champ-06
Drag Pack
OK guys since racing season is over on the East Coast I'm looking for any and all drag pack options for my 2016 Z06 (non Z07) for next season. Let's hear them. Thanks.
Former Vendor
Joined: May 2014
Posts: 3,311
Likes: 328
From: SAN FRANCISCO CALIFORNIA
http://c7z06owners.com/store/18x5/10...6-non-z07.html
Front I can supply the tires as well as rear. I offer the 325 40 18 and have stuffed the m&h 345 35 18 on them also.
I also will have a 19x12 replica C7 z06 wheel in stock which will be able to fit 345 drag radials on.
Any questions just holler back.
Last edited by NORCAL-SS; Dec 2, 2015 at 02:57 PM.
Thread Starter
Melting Slicks
Joined: Mar 2001
Posts: 3,251
Likes: 48
From: Parkland Florida
Corvette Challenge Champ-01
Dragster Challenge Champ-06
I've been setting up my customers for months with this on non z07s and saves 1500 over bogarts or welds
http://c7z06owners.com/store/18x5/10...6-non-z07.html
Front I can supply the tires as well as rear. I offer the 325 40 18 and have stuffed the m&h 345 35 18 on them also.
I also will have a 19x12 replica C7 z06 wheel in stock which will be able to fit 345 drag radials on.
Any questions just holler back.
http://c7z06owners.com/store/18x5/10...6-non-z07.html
Front I can supply the tires as well as rear. I offer the 325 40 18 and have stuffed the m&h 345 35 18 on them also.
I also will have a 19x12 replica C7 z06 wheel in stock which will be able to fit 345 drag radials on.
Any questions just holler back.
Burning Brakes
Joined: Sep 2006
Posts: 931
Likes: 96
From: Canyon Country CA
I would be concerned about the safety of Chinese aftermarket wheels. There is no QA like GM does or specs.
Unfortunately, there have been many accidents where China aftermarket wheels failed. Even some fatalities.
You could have the wheels checked for density, porosity and fatigue strength.
Unfortunately, there have been many accidents where China aftermarket wheels failed. Even some fatalities.
You could have the wheels checked for density, porosity and fatigue strength.
Former Vendor
Joined: May 2014
Posts: 3,311
Likes: 328
From: SAN FRANCISCO CALIFORNIA
I would be concerned about the safety of Chinese aftermarket wheels. There is no QA like GM does or specs.
Unfortunately, there have been many accidents where China aftermarket wheels failed. Even some fatalities.
You could have the wheels checked for density, porosity and fatigue strength.
Unfortunately, there have been many accidents where China aftermarket wheels failed. Even some fatalities.
You could have the wheels checked for density, porosity and fatigue strength.
btw gms wheels for the trucks are made in china
Last edited by NORCAL-SS; Dec 2, 2015 at 08:21 PM.
Advanced
Joined: Aug 2005
Posts: 90
Likes: 10
From: Chester VA
I've been setting up my customers for months with this on non z07s and saves 1500 over bogarts or welds
http://c7z06owners.com/store/18x5/10...6-non-z07.html
Front I can supply the tires as well as rear. I offer the 325 40 18 and have stuffed the m&h 345 35 18 on them also.
I also will have a 19x12 replica C7 z06 wheel in stock which will be able to fit 345 drag radials on.
Any questions just holler back.
http://c7z06owners.com/store/18x5/10...6-non-z07.html
Front I can supply the tires as well as rear. I offer the 325 40 18 and have stuffed the m&h 345 35 18 on them also.
I also will have a 19x12 replica C7 z06 wheel in stock which will be able to fit 345 drag radials on.
Any questions just holler back.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Former Vendor
Joined: May 2014
Posts: 3,311
Likes: 328
From: SAN FRANCISCO CALIFORNIA
Former Vendor
Joined: Aug 2005
Posts: 16,897
Likes: 412
From: Lewisville TX
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
When you start pushing BIG HP from the car, we do have the 15" conversion package ready for the car.
Our Billet drag spindles are one of the main reasons why you have cars like Mark Carlyle's Atomic Fusion running 6's in the quarter now.
The C7 presented a few more challenges to do the 15" conversion vs what the C5/6 cars but it is now complete as as full bolt on package.
Let me know if anyone has any questions.
Our Billet drag spindles are one of the main reasons why you have cars like Mark Carlyle's Atomic Fusion running 6's in the quarter now.
The C7 presented a few more challenges to do the 15" conversion vs what the C5/6 cars but it is now complete as as full bolt on package.
Let me know if anyone has any questions.
Instructor
Joined: Mar 2001
Posts: 179
Likes: 17
From: Dallas (area) Texas
Sent a quote request on the Z07 versions. I take it TPM sensors work and tire height for the drag pack of yours is ABS compatible (at least keeping the light off)? Also, do you have some pics with your car with these on? Thanks.