Signature SV305s Mounted up and on the Z
#1
Instructor
Thread Starter
Signature SV305s Mounted up and on the Z
I Got them mounted and put on yesterday. I can say with certainty, the SS tires ride 10x better than the Cup 2s. Even being run-flats the ride is much better. But besides that I'm completely enamored by how awesome the car looks now. It's amazing what a set of wheels will do. My friends at Custom Wheels Boutique in Fredericksburg mounted them up in an hour, and made it look easy. This is the second set they've mounted for me and are first class.
I went out today and did a quick shoot in a commuter lot down the street from my house and got some great images.
Signature SV305s 19x10.5 / 20x12.5 Matte Black Centers, Gloss Black Barrels, Stainless Hardware and Polished Lugs.
Enjoy and thanks for looking
I went out today and did a quick shoot in a commuter lot down the street from my house and got some great images.
Signature SV305s 19x10.5 / 20x12.5 Matte Black Centers, Gloss Black Barrels, Stainless Hardware and Polished Lugs.
Enjoy and thanks for looking
The following users liked this post:
Checkmate1 (05-06-2018)
#2
Drifting
Wow, stunning!! Great choice, they look really good.
The following users liked this post:
DavidC83 (05-06-2018)
The following users liked this post:
DavidC83 (05-06-2018)
#4
Former Vendor
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
Finally! Great photography skill, a black on black on black is probably the hardest combo to capture.
Love your cars and looking forward to equipping the rest of your fleet and all of your friends.
Love your cars and looking forward to equipping the rest of your fleet and all of your friends.
The following users liked this post:
DavidC83 (05-06-2018)
The following users liked this post:
DavidC83 (05-06-2018)
#7
Team Owner
The wheels look great give your Vette that mean and nasty look.
The following users liked this post:
DavidC83 (05-06-2018)
The following users liked this post:
DavidC83 (05-06-2018)
#10
Drifting
Looks great man, very good choice!
The following users liked this post:
DavidC83 (05-09-2018)
The following users liked this post:
DavidC83 (05-09-2018)
The following users liked this post:
DavidC83 (05-09-2018)
#15
Race Director
A few comments, and questions:
Looks badarse, rims are awesome, I try to go for less spokes but those have changed my thinking, the deep concave adds to their greatness.
Car looks lower than most Z07s, how low are you and what did you go with, LG spindles?
I went to ACS site, only saw Diffuser Fins, not complete Diffuser, are yours fins, if so the pictures do not tell such.
Great car, great wheels!!
Looks badarse, rims are awesome, I try to go for less spokes but those have changed my thinking, the deep concave adds to their greatness.
Car looks lower than most Z07s, how low are you and what did you go with, LG spindles?
I went to ACS site, only saw Diffuser Fins, not complete Diffuser, are yours fins, if so the pictures do not tell such.
Great car, great wheels!!
Last edited by onebadcad; 05-08-2018 at 07:44 PM.
#16
Instructor
Thread Starter
They're GM pieces
Thank you, I'm on stock bolts with cut bushings. The front bolts were bottomed out then raised 1-1/4 turn to keep from rubbing the spring. the rears are bottomed out and do not hit. I've had the car on a drive on lift after 100 miles or so of driving to verify there are no clearance issues, but every car is a little different.
The diffusers are separate pieces individually drilled and bolted to the bumper cover. They are super high quality and fit like a factory part. I bought the carbon flash painted version and its a dead on match.
A few comments, and questions:
Looks badarse, rims are awesome, I try to go for less spokes but those have changed my thinking, the deep concave adds to their greatness.
Car looks lower than most Z07s, how low are you and what did you go with, LG spindles?
I went to ACS site, only saw Diffuser Fins, not complete Diffuser, are yours fins, if so the pictures do not tell such.
Great car, great wheels!!
Looks badarse, rims are awesome, I try to go for less spokes but those have changed my thinking, the deep concave adds to their greatness.
Car looks lower than most Z07s, how low are you and what did you go with, LG spindles?
I went to ACS site, only saw Diffuser Fins, not complete Diffuser, are yours fins, if so the pictures do not tell such.
Great car, great wheels!!
The diffusers are separate pieces individually drilled and bolted to the bumper cover. They are super high quality and fit like a factory part. I bought the carbon flash painted version and its a dead on match.
The following users liked this post:
onebadcad (05-09-2018)