Want to get Jake stinger for a Z06 hood
#1
Team Owner
Thread Starter
Want to get Jake stinger for a Z06 hood
Having trouble ordering Jake at the dealer????
#3
Melting Slicks
I bought mine from Trunk Monkey - it's the genuine GM and is very high quality. I love it on my car - subtle but still "Jake." Link's below.
https://www.trunkmonkeyparts.com/oem...decal-23360470
https://www.trunkmonkeyparts.com/oem...decal-23360470
The following users liked this post:
3 Z06ZR1 (11-17-2018)
#4
Race Director
OEM the only way to Fly....
#6
Melting Slicks
Member Since: Aug 2016
Location: MOUNTAIN HOME Arkansas
Posts: 2,687
Received 957 Likes
on
620 Posts
Agree with all who say OEM. I had it done by tint guy & it turned out beautiful with the subdued Jake as shown above. One other thing, I would have (if you have one) the black stinger removed, easy for tinter with bit of heat. If you don't remove OE you will have an well defined "raised edge" because of the combined thickness-JMO & my tint guy.
#7
Team Owner
Thread Starter
Agree with all who say OEM. I had it done by tint guy & it turned out beautiful with the subdued Jake as shown above. One other thing, I would have (if you have one) the black stinger removed, easy for tinter with bit of heat. If you don't remove OE you will have an well defined "raised edge" because of the combined thickness-JMO & my tint guy.
The following users liked this post:
madrob2020 (11-18-2018)
#8
Team Owner
Thread Starter
#9
Race Director
Did the top to match. Just CF but it changed the whole car. Left the rails but top and halo. Sick.
Last edited by 23/C8Z; 11-18-2018 at 10:16 PM.
#10
Team Owner
Thread Starter