When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This was friday night at Baytown 2018 m8 with new dsc installed with original settings. Of course with other mods as well, got me into 9’s on second pass.
This was friday night at Baytown 2018 m8 with new dsc installed with original settings. Of course with other mods as well, got me into 9’s on second pass.
Heads, headers , borla attack, lower and upper pulley, e85, stage 3 cam, Tony Mano Throttel body, Chevy performance Jake Cai, built transmission, transmission controller, dsc version 4, Mickey Thompson’s, et street , 18x 10 Rear wheels, and a great tuner.
Heads, headers , borla attack, lower and upper pulley, e85, stage 3 cam, Tony Mano Throttel body, Chevy performance Jake Cai, built transmission, transmission controller, dsc version 4, Mickey Thompson’s, et street , 18x 10 Rear wheels, and a great tuner.
Nice! Definitely has more in it in good air.
Who built/tuned it? I’d definitely think should go 142-143 mph at least in good air. Did you log it at the track?
Mike Whitehouse @ G force performance Pearland Texas. I will take it back to the track when good air comes back to Texas. Excuse the ignorance but what do you mean log it at track?
Mike Whitehouse @ G force performance Pearland Texas. I will take it back to the track when good air comes back to Texas. Excuse the ignorance but what do you mean log it at track?
I meant to scan/datalog the car using HP Tuners.... then you can tell if it was pulling timing or not going down the track. (Among other things). Mike owned a C7Z for a couple of years so, I assume he’s pretty good on them. Judging by your 60’, I question if the throttle body is going 100% open out of the hole....unless it was spinning or something.
Heads, headers , borla attack, lower and upper pulley, e85, stage 3 cam, Tony Mano Throttel body, Chevy performance Jake Cai, built transmission, transmission controller, dsc version 4, Mickey Thompson’s, et street , 18x 10 Rear wheels, and a great tuner.
Pardon my lack of terminology, I think I am referring to the TCM box mounted under the rear bumper. Perhaps I got it wrong. Heck I could not tell you what a stage 3 cam means. I am old, cams used to be referred with lift, duration, so I have no idea how to measure what I have.
It supposed to improve shifts like a old school shift kit in a turbo 350. However it is far from it what I remember. It does seem to respond a little faster with the paddles now also.
It supposed to improve shifts like a old school shift kit in a turbo 350. However it is far from it what I remember. It does seem to respond a little faster with the paddles now also.
Oh nice! Hmm. Who sells it? These A8s can be fickle man. Sometimes it shifts smooth and quick... other times seems to hold the gear instead of shifting...but its also probably the TC...