Too weird !!!
Thread Starter
Instructor
Joined: Apr 2005
Posts: 120
Likes: 11
From: SC
Too weird !!!
Several months ago it seemed that I had a stuck T-stat. 2018 Z started running really cool for no apparent other reason. Decided to ride it out until warmer weather and it has risen some but made no sense because was still too cool at 80 to 100 degrees.
I have the display set in track mode always. Decided to change modes last weekend while installing a MTB so that I could monitor RPM’s more accurately for the ECM relearn process and discovered that the other gauge setups registered normal operating temperature.
Going back to track mode, still showing low temp. Did some math and realized that the track mode temp was registering in Celsius . . . somehow. The other readings - oil temp, pressure, etc were in Fahrenheit and PSI.
How could one gauge out of for be set differently and HOW do I get it straightened out ?
Too weird !!!
I have the display set in track mode always. Decided to change modes last weekend while installing a MTB so that I could monitor RPM’s more accurately for the ECM relearn process and discovered that the other gauge setups registered normal operating temperature.
Going back to track mode, still showing low temp. Did some math and realized that the track mode temp was registering in Celsius . . . somehow. The other readings - oil temp, pressure, etc were in Fahrenheit and PSI.
How could one gauge out of for be set differently and HOW do I get it straightened out ?
Too weird !!!
Le Mans Master
Joined: Mar 2010
Posts: 5,909
Likes: 651
From: St. Louis
Several months ago it seemed that I had a stuck T-stat. 2018 Z started running really cool for no apparent other reason. Decided to ride it out until warmer weather and it has risen some but made no sense because was still too cool at 80 to 100 degrees.
I have the display set in track mode always. Decided to change modes last weekend while installing a MTB so that I could monitor RPM’s more accurately for the ECM relearn process and discovered that the other gauge setups registered normal operating temperature.
Going back to track mode, still showing low temp. Did some math and realized that the track mode temp was registering in Celsius . . . somehow. The other readings - oil temp, pressure, etc were in Fahrenheit and PSI.
How could one gauge out of for be set differently and HOW do I get it straightened out ?
Too weird !!!
I have the display set in track mode always. Decided to change modes last weekend while installing a MTB so that I could monitor RPM’s more accurately for the ECM relearn process and discovered that the other gauge setups registered normal operating temperature.
Going back to track mode, still showing low temp. Did some math and realized that the track mode temp was registering in Celsius . . . somehow. The other readings - oil temp, pressure, etc were in Fahrenheit and PSI.
How could one gauge out of for be set differently and HOW do I get it straightened out ?
Too weird !!!
