PPF and stripes

Reply Subscribe

Thread Tools

Search this Thread

Sep 6, 2025 | 06:06 PM

#21

mtraylor2001

Melting Slicks

Joined: Oct 2006

Posts: 2,066

Likes: 1,060

From: TX

Quote:

Originally Posted by MKK1

When I got PPF installed, the shop I used had a computer that took the badges into account when the template was cut. Virtually invisible.

Exactly. Thank you for validating my point.

Sep 6, 2025 | 06:24 PM

#22

planojoe

Thread Starter

Racer

Joined: Nov 2021

Posts: 362

Likes: 175

From: Plano TX

Quote:

Originally Posted by CorvetteSparky

I have PPF on top of my full-length stripes. I didn't want the expense of buying another set of stripes and having them installed. Yes, there is a small air gap that is perceptible if you look close. That gap is more visible on some colors than others. My installer has two hoods hanging on the wall with PPF over the stripe on one and under on the other so someone can see the difference before going ahead. If yours doesn't maybe find one that does or hit so cruises before the season is over. You're likely to find an example of one or the other. As has been said, PPF on top also protects the stripe.

I didn't ask if he has samples. It sounds like a good idea. If he doesn't I'll suggest it for the future.

Sep 6, 2025 | 06:30 PM

#23

planojoe

Thread Starter

Racer

Joined: Nov 2021

Posts: 362

Likes: 175

From: Plano TX

Quote:

Originally Posted by etc123

Stingray stripes with Xpel PPF on top

Sharp looking C8. Don't reallly know if you can tell from a picture but it looks fine to me (stripe under PPF)

Sep 6, 2025 | 06:46 PM

#24

mtraylor2001

Melting Slicks

Joined: Oct 2006

Posts: 2,066

Likes: 1,060

From: TX

Quote:

Originally Posted by planojoe

Thanks for the video. He's a little confusing. First he says it is best to remove the vinyl then put the ppf on and then replace the vinyl. Later he says it is best to put the ppf over the vinyl? He seems to agree with everyone here, LOL

No problem. There is no right or wrong answer in this situation. Either way you go. The paint is protected. The video provides a really good look at the options so you can decide on which way you want to go. If you dont mind the air gap I would think hard on protecting your vinyl.

Good luck.