Finally! A reasonably priced intake!
#1
Le Mans Master
Thread Starter
Finally! A reasonably priced intake!
I was browsing some Black Friday sales for my wife's Jeep and came upon this, aFe has released a lower priced intake that utilizes a plastic inlet tube rather than carbon fiber! At $459, this seems like a relative steal vs. the competition, especially considering you can't see any of the carbon fiber once the car is put back together.
https://afepower.com/afe-power-54-13...pro-5r-filters
I have the carbon fiber "Track Series" version on my car, but I can find no reason to justify that additional cost now unless you just really want to have some hidden carbon fiber bling.
My thread: https://www.corvetteforum.com/forums...s-arrived.html
https://afepower.com/afe-power-54-13...pro-5r-filters
I have the carbon fiber "Track Series" version on my car, but I can find no reason to justify that additional cost now unless you just really want to have some hidden carbon fiber bling.
My thread: https://www.corvetteforum.com/forums...s-arrived.html
The following 5 users liked this post by Kracka:
22c8z51 (12-02-2023),
ArizonaZ06 (11-22-2023),
Performance nut (11-22-2023),
Rushido1971 (11-21-2023),
vette_wess (12-30-2023)
#4
Le Mans Master
Thread Starter
#5
Drifting
Member Since: Aug 2000
Location: 2020 Z51 Coupe Ahwatukee Foothills, AZ
Posts: 1,566
Received 598 Likes
on
326 Posts
I was browsing some Black Friday sales for my wife's Jeep and came upon this, aFe has released a lower priced intake that utilizes a plastic inlet tube rather than carbon fiber! At $459, this seems like a relative steal vs. the competition, especially considering you can't see any of the carbon fiber once the car is put back together.
https://afepower.com/afe-power-54-13...pro-5r-filters
I have the carbon fiber "Track Series" version on my car, but I can find no reason to justify that additional cost now unless you just really want to have some hidden carbon fiber bling.
My thread: https://www.corvetteforum.com/forums...s-arrived.html
https://afepower.com/afe-power-54-13...pro-5r-filters
I have the carbon fiber "Track Series" version on my car, but I can find no reason to justify that additional cost now unless you just really want to have some hidden carbon fiber bling.
My thread: https://www.corvetteforum.com/forums...s-arrived.html
It's been said here over and over again,,,,, "that you can't ever have enough Carbon Fiber".
Well, that statement just doesn't play anymore.
The following users liked this post:
Kracka (11-22-2023)
#6
Le Mans Master
Thread Starter
When I was ordering my intake I even told my buddy and wife I wish they just made a plastic version! Kinda figured it would come eventually after they got us early adopters...
The following users liked this post:
Kracka (11-22-2023)
#8
Le Mans Master
Thread Starter
Love that badge!
The following users liked this post:
64365coupe (11-23-2023)
#9
Safety Car
Man, it's been a while since we've heard from you. Anyways, I am planning on going back to Bradenton December 7th which is the last test and tune for the year. The rest of Bradenton is the yearly big events..
The following users liked this post:
64365coupe (11-23-2023)
The following 2 users liked this post by derbs24:
64365coupe (11-23-2023),
Kracka (11-23-2023)
#12
Le Mans Master
Thread Starter
I originally had just the drop-in, but am happier with the full system knowing it's as efficient as it can reasonably be with my other cold side mods.
#13
Drifting
Member Since: Aug 2012
Location: Clermont fl
Posts: 1,293
Received 122 Likes
on
89 Posts
St. Jude Donor '13
Awesome !! I already have Soler ported polished throttle body and throttle controller and just recently had MRT's street /race catback installed so I'm thinking this will give me a little more fun factor.
The following users liked this post:
Kracka (11-29-2023)
#14
Pro
HTC Owners - Read their fitment notice carefully. Copied from the webpage
"Fitment Note
While this intake fits on the convertible models, the seal trim of the housing will not seal to the trunk cover. 58-10007R and 58-10007D are preferred for convertible models because the cover in those kits will properly seal the housing."
The following users liked this post:
edweiler (12-15-2023)
#15
Pro
Member Since: Mar 2021
Location: Virginia, Lynchburg-adjacent
Posts: 591
Received 389 Likes
on
200 Posts
It is noticeable, and decent. Bang for the buck, a drop-in air filter at $84 (https://afepower.com/afe-power-11-10...y-s-air-filter) is the better value, but if you're willing to chase the proverbial ponies, then the full intake is the way to do it. Based on Paragon's dyno testing, the aFe dry drop-in alone is worth +6whp/+2wtq while the aFe dry full intake is worth +8whp/+7wtq.
I originally had just the drop-in, but am happier with the full system knowing it's as efficient as it can reasonably be with my other cold side mods.
I originally had just the drop-in, but am happier with the full system knowing it's as efficient as it can reasonably be with my other cold side mods.
#16
Le Mans Master
Thread Starter
The following 2 users liked this post by Kracka:
22c8z51 (12-03-2023),
vette_wess (12-30-2023)
The following users liked this post:
Kracka (12-03-2023)
The following users liked this post:
Kracka (12-30-2023)
#19
@Kracka is a beast! ordered mine this morning, also ordered the bigger filters. total under 7. LETS GO! only at 3000 status in the12/20 window.. but will post the pics once i get installed! build also entered into the December forum post from @Midlifegoals
this community is 1 of a kind! glad to be here
this community is 1 of a kind! glad to be here
The following users liked this post:
Kracka (12-30-2023)
#20
Safety Car
@Kracka is a beast! ordered mine this morning, also ordered the bigger filters. total under 7. LETS GO! only at 3000 status in the12/20 window.. but will post the pics once i get installed! build also entered into the December forum post from @Midlifegoals
this community is 1 of a kind! glad to be here
this community is 1 of a kind! glad to be here