Bumper Frunk Button

Reply Subscribe

Thread Tools

Search this Thread

Mar 1, 2024 | 09:47 AM

traronf

Thread Starter

Racer

Joined: Feb 2015

Posts: 437

Likes: 162

From: Southwestern FL

Bumper Frunk Button

My dealer had to take off the front bumper cover during PDI and noticed today the front button does not open the frunk. Rather than drive an hour back does anyone know if I remove the frunk tub would I have access to the connector for the button? I suspect they did not plug it in when they put the bumper cover on.

Mar 1, 2024 | 11:44 AM

c7steve

Pro

Joined: Oct 2014

Posts: 528

Likes: 325

why did they have the front bumper off ? you might be able to access from underneath if you remove the large plastic cover,

Mar 1, 2024 | 12:07 PM

Wadejesu

Racer

Joined: Mar 2023

Posts: 401

Likes: 137

From: Center Hill Al

Open & Close it with FOB, then try button

Mar 1, 2024 | 06:05 PM

mortelec

Pro

Joined: Jul 2021

Posts: 694

Likes: 617

From: Crosslake, MN

Not by removing the frunk the radiator will be in the way but should be able to by removing the splash shields on the underside.

Mar 3, 2024 | 07:36 PM

EC145Pilot

Racer

Joined: Feb 2021

Posts: 422

Likes: 350

From: Mount Dora, FL

Look inside the driver front wheel well liner, forward part. Best way is to take the wheel off for access, remove the required screws to pull it back.
There are two plugs in there that must be disconnected to completely remove the front bumper. I believe one of them is for the Frunk button.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump