Bumper Frunk Button
Thread Starter
Racer
Joined: Feb 2015
Posts: 437
Likes: 162
From: Southwestern FL
Bumper Frunk Button
My dealer had to take off the front bumper cover during PDI and noticed today the front button does not open the frunk. Rather than drive an hour back does anyone know if I remove the frunk tub would I have access to the connector for the button? I suspect they did not plug it in when they put the bumper cover on.
Racer
Joined: Feb 2021
Posts: 422
Likes: 350
From: Mount Dora, FL
Look inside the driver front wheel well liner, forward part. Best way is to take the wheel off for access, remove the required screws to pull it back.
There are two plugs in there that must be disconnected to completely remove the front bumper. I believe one of them is for the Frunk button.
There are two plugs in there that must be disconnected to completely remove the front bumper. I believe one of them is for the Frunk button.
