Lowering front shocks

Reply Subscribe

Thread Tools

Search this Thread

Aug 5, 2024 | 12:50 PM

C8gofast

Thread Starter

Racer

Joined: Mar 2005

Posts: 410

Likes: 287

Lowering front shocks

I had a shop add the paragon springs and lower the car which has front lift system and mag ride.

I now want to raise the car a bit.

WTF. Where are the collar rings that you adjust with the spanner wrench’s? There is a rubber boot at top and at the bottom…. Is there no threaded shock body with collars?

Aug 5, 2024 | 01:36 PM

Kracka

Race Director

Joined: Jan 2014

Posts: 10,709

Likes: 7,099

From: Fulshear, TX

Front lift cars don't have adjustable coilover collars.

Aug 5, 2024 | 06:13 PM

C8gofast

Thread Starter

Racer

Joined: Mar 2005

Posts: 410

Likes: 287

Quote:

Originally Posted by Kracka

Front lift cars don't have adjustable coilover collars.

Bummer
That’s going to make doing a corner balance difficult.

Aug 5, 2024 | 06:55 PM

Kracka

Race Director

Joined: Jan 2014

Posts: 10,709

Likes: 7,099

From: Fulshear, TX

Quote:

Originally Posted by C8gofast

Bummer
That’s going to make doing a corner balance difficult.

Your rears are adjustable, assuming you have a Z51.

Aug 5, 2024 | 07:16 PM

smurfkiller

Safety Car

Joined: Nov 2010

Posts: 3,725

Likes: 84

From: Woodlands (houston) TX

Paragon has a spacer to raise the front back up just a lil bit. For when you use springs and lowering collars

Aug 10, 2024 | 10:15 PM

WiREDAVS

Advanced

Joined: Oct 2022

Posts: 90

Likes: 40

Typically the springs yield 1" alone and the collars around 3/4" alone. If you're looking to go up, remove the springs and use strictly the collars for a 3/4" drop. However you're going to need to remove the rear springs as well.