TH400 Swap in C4
Thread Starter
Safety Car
Joined: May 1999
Posts: 3,588
Likes: 1
From: Volcano, HI
TH400 Swap in C4
I'm about to swap a TH400 into my C4 and I have a couple of questions. The trans that I found has a bolt in yoke. Can I swap out that tail section/yoke, and what should I use? Would it be possible for me to bolt in the tail section from my 700R4?
Thanks!
Thanks!
Racer
Joined: Jan 2001
Posts: 336
Likes: 0
From: San Jose ca/ Menifee Ca
Re: TH400 Swap in C4 (Mojo)
The th400 tailshaft has a different mounting bolt pattern than that of the 700r4. The th350 and the 700r4 shate the same bolt pattern and the tailshafts are interchangeable. I would suggest a th350. I installed one in my car and even with 650 hp it's still going strong. If you have to use the th400, some fab work will have to be done to get it ounted to the torque arm.
Good luck
Good luck
Thread Starter
Safety Car
Joined: May 1999
Posts: 3,588
Likes: 1
From: Volcano, HI
Re: TH400 Swap in C4 (11sec84)
The th400 tailshaft has a different mounting bolt pattern than that of the 700r4. The th350 and the 700r4 shate the same bolt pattern and the tailshafts are interchangeable.
How is yours built?
