Anyone need an engine block?
Thread Starter
Safety Car
Joined: Sep 2000
Posts: 4,679
Likes: 6
From: Charles Town WV
Anyone need an engine block?
I'm getting rid of my 350. I posted this over in C3, but didn't get much of a response there.
Is $250 too much to ask for it?
As some of you may remember, I took a 350 out of my car and converted the car back to it's former big-block glory. Now I have a 350 sitting in my garage.
It needs a rebuild.
It's a 2-bolt main block, it's bored .040 over. I can still see the cross-hatch markes in the cylinder bores, so I'd be surprised if it needs to be bored again.
Here are some pictures.
Here's the Piston. You can see the 040 marking on it.
Piston
Here are the stampings off of the pad. Thanks to Bsiegpaint I know it was originally a 155hp 350 built on June 4, 1975.
Pad numbers
Here's the casting number off of the back of the block.
Block casting#
Here's the 882 head.
Head casting
Anyone interested?
Is $250 too much to ask for it?
As some of you may remember, I took a 350 out of my car and converted the car back to it's former big-block glory. Now I have a 350 sitting in my garage.
It needs a rebuild.
It's a 2-bolt main block, it's bored .040 over. I can still see the cross-hatch markes in the cylinder bores, so I'd be surprised if it needs to be bored again.
Here are some pictures.
Here's the Piston. You can see the 040 marking on it.
Piston
Here are the stampings off of the pad. Thanks to Bsiegpaint I know it was originally a 155hp 350 built on June 4, 1975.
Pad numbers
Here's the casting number off of the back of the block.
Block casting#
Here's the 882 head.
Head casting
Anyone interested?
Advanced
Joined: Jun 2002
Posts: 63
Likes: 0
From: Rochester mn
Re: Anyone need an engine block? (Steve Straus)
That seems like a pretty good deal. I sold my targetmaster 350 when I went back to the 327 from my car, same deal...a little leaky but good compression and cross hatch. I got $300.
Safety Car
Joined: Dec 2000
Posts: 3,767
Likes: 5
From: Jacksonville Fl
Re: Anyone need an engine block? (Steve Straus)
Hmmm...I'll give you a four bolt 350 block freshly bored .030 and ready to build...
In fact, I'd trade it to anyone with a 350 I can bolt in and run, at least good enough to sale a car with. :D
( Of course, you'd have to bring it to me...since I have no truck to carry it in. :( )
In fact, I'd trade it to anyone with a 350 I can bolt in and run, at least good enough to sale a car with. :D
( Of course, you'd have to bring it to me...since I have no truck to carry it in. :( )
