Wet sump LS9
Thread Starter
Intermediate
Joined: Jan 2021
Posts: 26
Likes: 4
From: Oklahoma
Wet sump LS9
I have a complete LS9 from blower to pan that I have put together. It’s fresh from the machine shop. It had nothing wrong with it but I wanted it checked out, and converted to wet sump. While it was at the machine shop, all the bearings were replaced and clearances recorded. Bearings were just replaced since it was opened. It has an upgraded cam, brand new lingenfelter snout, head studs, radium fuel rails, and an lsa front accessory drive system, minus provisions for a/c. I put this together for an airboat but I’m thinking of going another direction. Would there be any interest in this engine by anyone? It would be a great swap engine. Thanks.
