brodix track 1 cnc ported
Thread Starter
Melting Slicks
Joined: Sep 2000
Posts: 3,099
Likes: 0
From: PITTSBURGH PA
Cruise-In IV Veteran
Cruise-In V Veteran
flowed the brodix track 1 cnc ported 227 heads
http://forums.corvetteforum.com/zerothread?id=727889
[Modified by CORKVETTE1, 10:41 PM 1/10/2004]
[Modified by CORKVETTE1, 11:00 AM 1/11/2004]
[Modified by CORKVETTE1, 10:41 PM 1/10/2004]
[Modified by CORKVETTE1, 11:00 AM 1/11/2004]
Thread Starter
Melting Slicks
Joined: Sep 2000
Posts: 3,099
Likes: 0
From: PITTSBURGH PA
Cruise-In IV Veteran
Cruise-In V Veteran
Re: flowed the brodix track 1 cnc ported 227 heads (CORKVETTE1)
the above link is to the dyno numbers
I was shocked when we went in there at the place we walked in and didn't see anybody at first so we walked farther in and into the room to the right where the cnc machine is there was three guys in there working and nobody came up to us yet and we were just looking around then all of a sudden it sounded like a top fuel car coming right through the wall literally I then ran over to a guy that was working a sand blaster machine and asked him was that a chassis dyno and he said no come with him and we followed him through the building and he opened up a door and we are right in a middle of a engine dyno pull open headers and all and it was freaking screaming when they shut it down I asked them what it made they promptly told me 800hp holy poopie I said and then I said I am here to see Jeff and the one guy pointed to the other guy running the dyno and said that's him I just could not believe the equipment he had and aluminum heads every where I was very impressed he had more high performance stuff in that place than I ever saw anywhere before he has some major money wrapped up there but he was very down to earth to talk to also and we bullpoopieed for awhile and left
:cheers:
I was shocked when we went in there at the place we walked in and didn't see anybody at first so we walked farther in and into the room to the right where the cnc machine is there was three guys in there working and nobody came up to us yet and we were just looking around then all of a sudden it sounded like a top fuel car coming right through the wall literally I then ran over to a guy that was working a sand blaster machine and asked him was that a chassis dyno and he said no come with him and we followed him through the building and he opened up a door and we are right in a middle of a engine dyno pull open headers and all and it was freaking screaming when they shut it down I asked them what it made they promptly told me 800hp holy poopie I said and then I said I am here to see Jeff and the one guy pointed to the other guy running the dyno and said that's him I just could not believe the equipment he had and aluminum heads every where I was very impressed he had more high performance stuff in that place than I ever saw anywhere before he has some major money wrapped up there but he was very down to earth to talk to also and we bullpoopieed for awhile and left
:cheers:
