Chev 350 Intake Manifold
Thread Starter
3rd Gear
Joined: Jul 2004
Posts: 3
Likes: 0
From: Brisbane Qld
Chev 350 Intake Manifold
Katicore Motorsport are announcing their new website http://www.katicore.com.au .
We offer two variations on the Eight Throttle Body Stack System with an Upright Version and Cross Over Version. Check out the site, we also have a Gen III/LS 1 Version coming on line shortly.
If you require a manifold system for any other car please do not hesitate to contact me and ask any quesitons at corey@katicore.com.au
We can organise freight anywhere in the world
Look forward to working with you all.
Corey
We offer two variations on the Eight Throttle Body Stack System with an Upright Version and Cross Over Version. Check out the site, we also have a Gen III/LS 1 Version coming on line shortly.
If you require a manifold system for any other car please do not hesitate to contact me and ask any quesitons at corey@katicore.com.au
We can organise freight anywhere in the world
Look forward to working with you all.
Corey
Thread Starter
3rd Gear
Joined: Jul 2004
Posts: 3
Likes: 0
From: Brisbane Qld
Desertdawg if I have not responded I probably have not received as yet or it is tied up somewhere in the WWW. Try sending it to either corey.clarke@bigpond.com or corey@katicore.com.au look forward to receiving it.
Jussi - Yes we can sell the manifold and fuel rails seperately. Email me for further details but around the $AUD 1000.00 mark.
Any further questions just let me know.
Cheers to you all. Good 'vetting
Jussi - Yes we can sell the manifold and fuel rails seperately. Email me for further details but around the $AUD 1000.00 mark.
Any further questions just let me know.
Cheers to you all. Good 'vetting
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
3rd Gear
Joined: Jul 2004
Posts: 3
Likes: 0
From: Brisbane Qld
Twin Turbo
We can supply throttle bodies with DCOE, IDA and IDF Patterns
Desertdawg
I have just responded to your email. Please read and let me know your thoughts. Hope I can help. I only just received two emails together???
Thanks everyone
We can supply throttle bodies with DCOE, IDA and IDF Patterns
Desertdawg
I have just responded to your email. Please read and let me know your thoughts. Hope I can help. I only just received two emails together???
Thanks everyone
Instructor
Joined: Jul 2001
Posts: 119
Likes: 0
From: FINLAND
Originally Posted by Clarkey
Jussi - Yes we can sell the manifold and fuel rails seperately. Email me for further details but around the $AUD 1000.00 mark.
Any further questions just let me know.
Cheers to you all. Good 'vetting
Any further questions just let me know.
Cheers to you all. Good 'vetting
Could you tell us the measurements of the intake?
More specifically the hight (with or without tb & stacks) and size of the ports...and could it be ported to FEL-1206/1207 size?
Any flow data would also be great...
I also noted that vertical port unit had 50mm tb's as compared to 45mm
in cross flow version...is this just coinside or does the vertical one have bigger ports?
Jussi
