NEVER PUT COMPOUND ON CLEAR COTE...If it is a small spot I use a little baking soda and a clean damp rag. No compound polising or rubbing on clear cote.
Buffing Scratch
Thread Starter
2nd Gear
Joined: May 2007
Posts: 2
Likes: 0
Buffing Scratch
I have a 2007 Z06. The shop saw a scratch on the hood and "buffed" it out. Only when they buffed it (apparently with a mechanical buffing tool) they left circular marks from the buffing visible when you place it under direct lighting or look closely. (So now I have large circular marks where before there was a minor scratch.) What can I do to get rid of those tell-tale signs of the buffing? Any thoughts?
Cruising
Joined: Jul 2007
Posts: 11
Likes: 5
From: AZ
Contact Adams polishes, they have a link on the left side of the screen or www.adamspolishes.com . I love this stuff, since I started using it my Ruby 40th Anniversary car has never looked better; just like glass.
Melting Slicks
Joined: Nov 2003
Posts: 2,668
Likes: 119
From: St. Charles Mo
CI 5 & 8 Veteran
Not sure what you guys are talking about but I always use a 3M 05996 Perfect-It Dark Car Foam Polishing Pad Glaze after lightly color sanding the final clear coat with 2000 Micro fine wet sanding paper. Works great, just don't come anywhere near breaking through the clear coat.
Probably not a factory correct resto process, but ask me if I care.
Bullshark
Last edited by Bullshark; Nov 14, 2007 at 01:25 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Pro
Joined: Aug 2004
Posts: 595
Likes: 5
From: Schuylkill County PA
I agree that the shop should finish their work if you're not satisfied. However, if you decide to do it yourself, you'll want to use a machine (rotary preferrably, or random oribtal buffer) with a quality abrasive polish of your choice (3M, Menzerna, etc.) to correct the 'Vette's hard clear coat. It will likely require a couple passes with various polishes and pads of decreasing abrasiveness to get the desired result.
You'll find a lot more information about it in the Car Care forum
You'll find a lot more information about it in the Car Care forum
