admin help: Kent-Moore tools for everyone
Thread Starter
Instructor
Joined: Jul 2011
Posts: 128
Likes: 0
From: Vancouver WA
admin help: Kent-Moore tools for everyone
Please close this as soon as you read it, i have this posted in the C4 and C5 tech.
I want this to get alot of attention as i think this could be good for our community, any help an admin can give would be.... well.. helpfull
A GM dealership im my area is closing down and selling off all there kent-moore tools ( J Tools )
I need everyones help so i can buy tools we all can use, i would loan them out for the charge of shipping and you could ship them back when your done, is what i was thinking.
So, what tools do we need, J numbers would be nice so start brainstorming and ill make a list.
I need to know by the end of the month (1/2013) as they will all go bye bye (no clue where, the servcie manager said they would be gone)
I want this to get alot of attention as i think this could be good for our community, any help an admin can give would be.... well.. helpfull
A GM dealership im my area is closing down and selling off all there kent-moore tools ( J Tools )
I need everyones help so i can buy tools we all can use, i would loan them out for the charge of shipping and you could ship them back when your done, is what i was thinking.
So, what tools do we need, J numbers would be nice so start brainstorming and ill make a list.
I need to know by the end of the month (1/2013) as they will all go bye bye (no clue where, the servcie manager said they would be gone)
IB Staff
Joined: Feb 2009
Posts: 10,575
Likes: 4
Not sure I understand your request as posting this in the Help section won't give you any additional exposure as this section is for Help with the forum and website.
If you want your threads in the C4 and C5 locked, you can contact the moderators of those sections. The moderators can be found in the lower-right section of the index for each section.
Given that your post asked for part numbers of products you think are needed, I'm further confused as to what is being requested. Lock this thread? Lock the threads in the C4 and C5?
Cross-posting is usually not a good idea in general as each post is probably considered important to the author of those posts.
If you want your threads in the C4 and C5 locked, you can contact the moderators of those sections. The moderators can be found in the lower-right section of the index for each section.
Given that your post asked for part numbers of products you think are needed, I'm further confused as to what is being requested. Lock this thread? Lock the threads in the C4 and C5?
Cross-posting is usually not a good idea in general as each post is probably considered important to the author of those posts.
Thread Starter
Instructor
Joined: Jul 2011
Posts: 128
Likes: 0
From: Vancouver WA
no i don't want it locked
posting advice?
am i posting in the right section?
maybe send a PM to all the mods and admin to get this going a little faster?
Sticky the posts untill the end of the month?
stuff like that, diddn't know where to go so i posted here in "help"
time is an issue
posting advice?
am i posting in the right section?
maybe send a PM to all the mods and admin to get this going a little faster?
Sticky the posts untill the end of the month?
stuff like that, diddn't know where to go so i posted here in "help"
time is an issue
