Intake manifold gasket
Thread Starter
Heel & Toe
Joined: Feb 2013
Posts: 23
Likes: 2
Intake manifold gasket
I'm rebuilding my 283/270 from my 1957 and I need assistance on finding the correct intake manifold gasket. In the "TIM" page 102 shows a picture of part of the gasket with a "GM" logo. The manual states that the "intake manifold gaskets have visible "GM" square tabs on the front and rear seals as well as on the long side gaskets". I purchased a set from my local parts house and a set from paragon, neither have the "GM" logo as described in the tim. Can they be purchased and from whom? Thanks for your assistance.
Last edited by 57#3099; Oct 25, 2021 at 06:55 PM.
IB Staff
Joined: Feb 2009
Posts: 10,578
Likes: 4
I'm rebuilding my 283/270 from my 1957 and I need assistance on finding the correct intake manifold gasket. In the "TIM" page 102 shows a picture of part of the gasket with a "GM" logo. The manual states that the "intake manifold gaskets have visible "GM" square tabs on the front and rear seals as well as on the long side gaskets". I purchased a set from my local parts house and a set from paragon, neither have the "GM" logo as described in the tim. Can they be purchased and from whom? Thanks for your assistance.
Go back to the main forum page:
https://www.corvetteforum.com/forums/
Now start to slowly scroll down until you see your generation of Corvette listed.
C1 or C2 (1953 - 1967)?:
https://www.corvetteforum.com/forums...2-corvettes-4/
We encourage new members to take some time to browse around the site and read the Announcements and Stickies as they contain important and frequently asked information.
Thank-you
