Bolt on Knock offs
Thread Starter
Navigator
Joined: Jun 2017
Posts: 9
Likes: 1
Bolt on Knock offs
I am installing some direct bolt-on after-market knockoffs. How do you put the center cap on? I know this sounds stupid but are the three tabs supposed to be completely out of site? The directions say just pop them in with my thumb. It aint happening. I don't want to damage or dent them in this process. I did see where some people had trouble getting them off. Thanks in advance.
IB Staff
Joined: Feb 2009
Posts: 10,575
Likes: 4
I am installing some direct bolt-on after-market knockoffs. How do you put the center cap on? I know this sounds stupid but are the three tabs supposed to be completely out of site? The directions say just pop them in with my thumb. It aint happening. I don't want to damage or dent them in this process. I did see where some people had trouble getting them off. Thanks in advance.
Instead, please find the correct section, based on the generation of the Corvette.
Go back to the main forum page:
https://www.corvetteforum.com/forums/
Now start to slowly scroll down until you see your generation of Corvette listed.
C1 or C2 (1953 - 1967)?:
https://www.corvetteforum.com/forums...2-corvettes-4/
We encourage new members to take some time to browse around the site and read the Announcements and Stickies as they contain important and frequently asked information.
Thank-you
