Alignment
Thread Starter
Racer
Joined: May 2008
Posts: 381
Likes: 0
From: Mountlake Terrace Washington
Yes i had it aligned for the street,my goodyears were shot.they will want the new tires on first.They set the air pressers to 38 in the front and 36 in the back for the michelins,then they want you to bring the car back every 5000 miles to check tire wear for free and make adjustments if needed.My car has never driven so well.Cost was 179.95 well worth it.
Last edited by rwarhol; Oct 16, 2012 at 08:10 PM.
Melting Slicks
Joined: Jul 2010
Posts: 3,001
Likes: 243
From: Surprise, Az
It was 185 at LJ's and I'm a corvette club member.... they were also a bit contentious about doing an alignment on a brand new car too. I went to Speedware for the camber adjuster install (pfadt), much nicer folks to work with.
Melting Slicks
Joined: Mar 2010
Posts: 2,586
Likes: 215
From: WA
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Sr.Random input generator
Joined: Jan 2008
Posts: 7,804
Likes: 2,232
From: Sammamish, WA
I have been using the Woodinville Firestone for quite a while for alignment, and just got lifetime alignment for my '13 Z06 for $179. I only work with their master technician (Tony Riley), and he has so far done a great job with all my Corvettes and other cars. I used the aggressive street spec from PFADT. The lifetime alignment becomes very useful, since I can switch to a more aggressive config in Spring time if I need to, and it is not much more expensive than a 1-time alignment anyway.