enjoy the new power
MTI 402 results!!!
Thread Starter
Burning Brakes
Joined: Apr 2002
Posts: 1,020
Likes: 9
From: Ft. Collins, CO
MTI 402 results!!!
How's it going guys. Just wanted to say thanks to MTI (Houston) for putting together an excellent pagkage together for me. The car runs very good and pulls hard down. Special thanks to Dave Coates for everything! Final numbers were 499.9rwhp/496.6rwtq. I though these numbers were great considering the size of the cam. This was done on a very safe tune and on 91 Octane! The car is extremely drivable and is very quite during normal driving. At WOT though, it sounds mean as hell. Thanks again Dave and everyone else over at MTI!
Tony
Here's my set up.
LS2 402 Stoker Motor:
Lunati Crank, Lunati Pro Billet I Beam Rods, Wiseco Ceramic Coated pistons, Total Seal Rings, Clevite Bearings and ARP Main Studs.
Motor was ballanced and blueprinted.
MTI Stage II R Heads w/Ferrea Valves (2.055 intake/1.60 exhaust)
MTI Z1 Camshaft (236/236 .585/.585 - 112 LSA)
Fast 90MM Intake Manifold
90MM Throttle Body
Kooks 1 7/8 LT headers W/Catless X pipe
Melling Race Ported Oil Pump
Comp Cams OEM Lifters
Ford SV0 30LB Fuel Injectors
7.4 Inch Hardened Chromoly Pushrods
Tony
Here's my set up.
LS2 402 Stoker Motor:
Lunati Crank, Lunati Pro Billet I Beam Rods, Wiseco Ceramic Coated pistons, Total Seal Rings, Clevite Bearings and ARP Main Studs.
Motor was ballanced and blueprinted.
MTI Stage II R Heads w/Ferrea Valves (2.055 intake/1.60 exhaust)
MTI Z1 Camshaft (236/236 .585/.585 - 112 LSA)
Fast 90MM Intake Manifold
90MM Throttle Body
Kooks 1 7/8 LT headers W/Catless X pipe
Melling Race Ported Oil Pump
Comp Cams OEM Lifters
Ford SV0 30LB Fuel Injectors
7.4 Inch Hardened Chromoly Pushrods
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Le Mans Master
Joined: Jun 2006
Posts: 5,562
Likes: 1
From: Bedford TX
Originally Posted by tlaselva
I'd take a properly set up N/A motor over a Turbo setup any day. 
)I like a good N/a motor, but boost is fun
specially on a BIG motor! nice number still!
Thread Starter
Burning Brakes
Joined: Apr 2002
Posts: 1,020
Likes: 9
From: Ft. Collins, CO
Originally Posted by Blue Flame-less Joe
Now get that beast to the track and lets see the numbers that really matter.
Joe
Joe
Tony
Melting Slicks
Joined: Sep 2003
Posts: 2,911
Likes: 1
From: Augusta GA
St. Jude Donor '05-'06
Originally Posted by Blue Flame-less Joe
Now get that beast to the track and lets see the numbers that really matter.
Joe
Joe
I need to see more 402 numbers before winter work. I have seen the tail lights of A4 402s
Dave
