quarter mile guesses?
Thread Starter
Instructor
Joined: Jan 2008
Posts: 124
Likes: 0
From: wildwood mo
quarter mile guesses?
I just got my 02 Z06 back from the dyno. I added a cam and an u/d pulley to go along with my vararam, l/t, off road x-pipe, and cat back.
I'm pretty excited about the results. I was hoping to be able to make it to the drag strip however the racetrack closes this week and I will not be able to make it until next year. The car made 423 hp and 405 torque.
I was wondering if anyone had any educated quesses on the quarter mile time with the dyno results. Thx for the replies,
I'm pretty excited about the results. I was hoping to be able to make it to the drag strip however the racetrack closes this week and I will not be able to make it until next year. The car made 423 hp and 405 torque.
I was wondering if anyone had any educated quesses on the quarter mile time with the dyno results. Thx for the replies,
Le Mans Master
Joined: Aug 2007
Posts: 6,473
Likes: 297
From: Orange Park FL
I love this stuff....LOL. If you can drive and have good air......
With street tires : 12.0 @ 117, based on 2.0 sixty foot
With drag radials : 11.7 @ 120, based on 1.70 sixty foot
With ET Streets : 11.6 @ 120, based on 1.65 sixty foot
Good luck Bro..let us know the winner.
Pitt
With street tires : 12.0 @ 117, based on 2.0 sixty foot
With drag radials : 11.7 @ 120, based on 1.70 sixty foot
With ET Streets : 11.6 @ 120, based on 1.65 sixty foot
Good luck Bro..let us know the winner.
Pitt
Melting Slicks
Joined: Aug 2006
Posts: 2,205
Likes: 2
From: port monmouth nj
what tires and clutch and im sure youll get some live numbers 12.2 street tires 11.8 dr's 11.5 et streets assuming stock clutch only a guesse i run an a-4. post and surprise us or come to nj we dont close until the traction ceases
Le Mans Master
Joined: Aug 2007
Posts: 6,473
Likes: 297
From: Orange Park FL
Pitt
Advanced
Joined: Jan 2001
Posts: 92
Likes: 0
From: St. Louis, Missouri USA
Rich,
The track will be open till the 15th of November....sorry, I found out after you left today. Oh, my guess.....12.30s on street tires and 11.80s on drag radials. That same (small cam) with a different centerline went 11.97 @ 118 last night in a camaro on street tires at GIR.
See ya,
Joe
The track will be open till the 15th of November....sorry, I found out after you left today. Oh, my guess.....12.30s on street tires and 11.80s on drag radials. That same (small cam) with a different centerline went 11.97 @ 118 last night in a camaro on street tires at GIR.
See ya,
Joe
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Instructor
Joined: Jan 2008
Posts: 124
Likes: 0
From: wildwood mo
Thx for the update Joe. By the way, Joe and Bill did the install,dyno tune, cam selection and I could not be happier with results. Thx gentleman for the great work and service!!!!!
Last edited by richsblackz06; Oct 16, 2008 at 12:23 AM.
Melting Slicks
Joined: Oct 2007
Posts: 2,464
Likes: 2
From: Cedarburg, WI
