it's an awesome racing series. 
KUDOS for ECS
Thread Starter
Pro
Joined: Mar 2007
Posts: 507
Likes: 5
From: Macungie Pa
KUDOS for ECS
Just finished my latest winter project. I had my 2004 ZO6 tuned and dyno'd by Doug at ECS yesterday and I couldn't be happier with the results...
467 rwhp ...409 rwtq
ECS "Big NA" cam
Sent my 243's to Mike at TEA for the stg 2 upgrade and mill for 60cc
Powerbond U/D pulley
the above were added this winter to the following...
LG Streets/x pipe into TI's
Vavaram/duct
Stock LS6 TB
Stock LS6 intake
I am an old school turd and I love the sound and feel of big lopey cams and this one certainly fits the bill. Even with the TI's, I won't be going anywhere un-noticed.
My goal this summer is to put her in the 11's somewhere....
Many, many thanks to Chris, Doug, and Mike and the crew at Cream Ridge. Pros all the way...
I am sure I was annoying with all the phone calls with questions...but I could never tell from your end.
and a special shout-out to my son Curtis for AGAIN doing an excellent job on the assembly of my Z...
I owe you...
467 rwhp ...409 rwtq
ECS "Big NA" cam
Sent my 243's to Mike at TEA for the stg 2 upgrade and mill for 60cc
Powerbond U/D pulley
the above were added this winter to the following...
LG Streets/x pipe into TI's
Vavaram/duct
Stock LS6 TB
Stock LS6 intake
I am an old school turd and I love the sound and feel of big lopey cams and this one certainly fits the bill. Even with the TI's, I won't be going anywhere un-noticed.
My goal this summer is to put her in the 11's somewhere....
Many, many thanks to Chris, Doug, and Mike and the crew at Cream Ridge. Pros all the way...
I am sure I was annoying with all the phone calls with questions...but I could never tell from your end. and a special shout-out to my son Curtis for AGAIN doing an excellent job on the assembly of my Z...
I owe you...
Le Mans Master
Joined: Jun 2004
Posts: 6,752
Likes: 3
From: Bethlehem PA
Congrats on the new set up Should be an azzload of fun.
The guys are pretty
down there.
Let me know if/when you'll be hitting a local track.
If not, some Summer cruises will be nice.
Scott
Should be an azzload of fun.The guys are pretty
down there.Let me know if/when you'll be hitting a local track.
If not, some Summer cruises will be nice.
Scott
Thread Starter
Pro
Joined: Mar 2007
Posts: 507
Likes: 5
From: Macungie Pa
thanks Scott
Original rubber and clutch will probably dictate the track time.
I usually hit all the Wheels of Time cruises at Macungie Park and some co-workers are already lining up matches for test n tune at the Grove.
I intend on checking out the Corvette Challenge Series in Englishtown
Charlie
Original rubber and clutch will probably dictate the track time.
I usually hit all the Wheels of Time cruises at Macungie Park and some co-workers are already lining up matches for test n tune at the Grove.
I intend on checking out the Corvette Challenge Series in Englishtown
Charlie
AMP Racing
Joined: Aug 2006
Posts: 10,754
Likes: 589
From: Washington TWP NJ
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
Great numbers! Congrats...
I hope to see you at E-town or Maple Grove sometime. (Super Chevy Show??)
I hope to see you at E-town or Maple Grove sometime. (Super Chevy Show??)
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Burning Brakes
Joined: Jun 2008
Posts: 768
Likes: 0
From: Lexington KY
congrats!
I have been wondering what a set of TEA stage 2 heads would do with a ECS BIG n/a cam. Esp since i have that same cam lol. The only diff in our mods is i am running ARH 1 7/8" headers and 3" ORX pipe. Any way you can post your dyno graph?
I have been wondering what a set of TEA stage 2 heads would do with a ECS BIG n/a cam. Esp since i have that same cam lol. The only diff in our mods is i am running ARH 1 7/8" headers and 3" ORX pipe. Any way you can post your dyno graph?
Thread Starter
Pro
Joined: Mar 2007
Posts: 507
Likes: 5
From: Macungie Pa
I'll post up the graph as soon as I retrieve it from my sons truck. Give me a few days.