FS: Single Turbo- Top mount Setup
 

Time to sell my turbo setup. Its all off the car and laying on my garage floor waiting for a new home. This setup was built by hand by me. The Hotside pipes I tacked together and had professionally tig welded. The manifold is made from Schedule 10 weld els and piping. It is MUCH thicker and stronger than what other guys use. This setup is tested, proven and documented on these forums. I put about 1500 miles on the setup before removing it. Turbo still has like new shaft play. This setup makes over 600RW with ease and has a Torque curve that makes the centri guys jealous. :P The spool and response is nearly instant. The dyno sheet was a forged 9:1 347 with stage 3 blower cam. Pump gas only, no meth.

This setup does retain AC. The hood support where the light is mounted has to be notched a little so the hood will close all the way. It does require the radiator to be laid down just like any supercharger kit. You will also have to tap the oil pan for an oil return line, again like most Centri's these days. It includes the midpipe and bolts right up to your factory or aftermarket mufflers.

My price is $3600 SHIPPED. And keep in mind this will be several big heavy boxes...so shipping wont be cheap.

Feel free to message me with any questions. I work a lot..and wierd hours. but will do my best to respond quickly.

The turbo is a Turbonetics TC-76 Hurricane Vanessa.
XSPower wastegate(it worked perfectly)
ECS Intercooler
Tial 50mm BOV
K&N air filter


Build threads:
https://www.corvetteforum.com/forums...c76-build.html

https://www.corvetteforum.com/forums...8-results.html


http://i410.photobucket.com/albums/p...ps4070b084.jpg

http://i410.photobucket.com/albums/p...psb0cedd15.jpg

http://i410.photobucket.com/albums/p...ps8e5d875c.jpg

http://i410.photobucket.com/albums/p...ps7e1195d6.jpg

http://i410.photobucket.com/albums/p...ps74606d78.jpg

http://i410.photobucket.com/albums/p...ps655e95b9.jpg

http://i410.photobucket.com/albums/p...ps6273b749.jpg

why are you letting it go?

The joys of divorce... need the money for more important things. The car may be going soon as well. :(

Evening crowd bump :)

Does it come with that coolant tank and would I need to hunt down a stock driver exhaust manifold?

It doesnt come with the tank...honestly the one I used sucks :P I will ship the stock manifold for the drivers side with the kit. :yesnod:

SO what would I need to bolt this on to my stock z06? Tune and injectors?

Pretty much. You'd need more fuel pump as well. A Boost-a-pump would get the job done. I personally dropped a walbro 400 fuel pump in the tank rather than using a BAP.

:smash:

:smash:

a few bites..but no takers yet. Still for sale!

:smash:

Trade for a set of wheels and tires?

Sorry, doing this to free up cash. May also have to sell/trade the car...so wheels and tires wouldnt be of value to me :/

:smash:

:smash:

:smash:

I want it. Just trying to figure out how to pay for it lol 😂😂

I want to keep it...if only I didnt need the money :P This setup is SO perfect for a street car. Just pure fun...blow off the tires at will with instant boost in any gear. I already miss it :(

free bump for you - what's the deal with the aluminum tank?