Electrical wiring info....Anti-Skid & Brake Lights
Thread Starter
Drifting
Joined: Aug 2001
Posts: 1,606
Likes: 14
From: Vacaville, CA
Electrical wiring info....Anti-Skid & Brake Lights
Need to know where the Anti-Skid wires and brake light wires come in from the back on a C-4. There seems to be a flat wire loom that comes up under the passenger side bolster then goes up under the dash to some plugs.
Does anyone specifically know what color the anti-skid wires and brake light wires are and how to re-wire them directly to the brake pedal and 12v system?
Thanks!
Does anyone specifically know what color the anti-skid wires and brake light wires are and how to re-wire them directly to the brake pedal and 12v system?
Thanks!
Team Owner
Joined: Aug 2000
Posts: 40,156
Likes: 45
From: San Pedro CA
dude...
I can't tell you how scary this thread is. WTF are you thinking? What has made you want to hard wire these items? If you ain't careful, bad things WILL happen.
May I ask, what has lead you to this point, and why don't you have a Helm Manual (www.helminc.com) to guide you?
I can't tell you how scary this thread is. WTF are you thinking? What has made you want to hard wire these items? If you ain't careful, bad things WILL happen.
May I ask, what has lead you to this point, and why don't you have a Helm Manual (www.helminc.com) to guide you?
Thread Starter
Drifting
Joined: Aug 2001
Posts: 1,606
Likes: 14
From: Vacaville, CA
Actually, this will be striclty a track car. All I need are the instruments, brake lights, anti-skid, and fuel pump. An aftermarket computer will only control the engine functions. I have an aluminum aftermarket dash that will have an ignition switch and a push-button starter.
B/R
B/R
Team Owner
Joined: Jan 2003
Posts: 20,293
Likes: 240
From: Summerland B.C. Canada
Team Owner
Joined: Aug 2000
Posts: 40,156
Likes: 45
From: San Pedro CA
Actually, this will be striclty a track car. All I need are the instruments, brake lights, anti-skid, and fuel pump. An aftermarket computer will only control the engine functions. I have an aluminum aftermarket dash that will have an ignition switch and a push-button starter.
B/R
B/R
