ECS BLower Cam Specs
Thread Starter
Melting Slicks
Joined: Mar 2004
Posts: 3,472
Likes: 18
From: Lake Ozark, MO
ECS BLower Cam Specs
Based upon recommendation talked to ECS about a blower cam. They are really reluctant to give out the specs of their "custom designed" cam for my particular application. I guessing because it it it so close to an "off the shelf" like a Comp cam that sells for less $$$.
Anyone run into this before? Want to purchase based on recommendation, but would like to know what I'm getting because I may be able to by a cheaper cam kit if specs are same....with $$ as tight as they are.
Anyone run into this before? Want to purchase based on recommendation, but would like to know what I'm getting because I may be able to by a cheaper cam kit if specs are same....with $$ as tight as they are.
Pro
Joined: Mar 2006
Posts: 501
Likes: 0
From: Mission Viejo Ca
Based upon recommendation talked to ECS about a blower cam. They are really reluctant to give out the specs of their "custom designed" cam for my particular application. I guessing because it it it so close to an "off the shelf" like a Comp cam that sells for less $$$.
Anyone run into this before? Want to purchase based on recommendation, but would like to know what I'm getting because I may be able to by a cheaper cam kit if specs are same....with $$ as tight as they are.
Anyone run into this before? Want to purchase based on recommendation, but would like to know what I'm getting because I may be able to by a cheaper cam kit if specs are same....with $$ as tight as they are.
Burning Brakes
Joined: May 2003
Posts: 850
Likes: 0
From: Green Lane Pennsylvania
If you were sitting in ECS's shoes would you give out that information for others to copy? I have their blower cam and am quite pleased with it expecially at top end.
Based upon recommendation talked to ECS about a blower cam. They are really reluctant to give out the specs of their "custom designed" cam for my particular application. I guessing because it it it so close to an "off the shelf" like a Comp cam that sells for less $$$.
Anyone run into this before? Want to purchase based on recommendation, but would like to know what I'm getting because I may be able to by a cheaper cam kit if specs are same....with $$ as tight as they are.
Anyone run into this before? Want to purchase based on recommendation, but would like to know what I'm getting because I may be able to by a cheaper cam kit if specs are same....with $$ as tight as they are.
Thread Starter
Melting Slicks
Joined: Mar 2004
Posts: 3,472
Likes: 18
From: Lake Ozark, MO
Understand the business side.
I guess real issue is my builder does not know what were putting in there, he has his own ideas fora cam profile based on my options...AND I don't like th idea of buying something first before I can actually find out what I'm buying. Thanks for you opinions, ECS must be good
I guess real issue is my builder does not know what were putting in there, he has his own ideas fora cam profile based on my options...AND I don't like th idea of buying something first before I can actually find out what I'm buying. Thanks for you opinions, ECS must be good
Thread Starter
Melting Slicks
Joined: Mar 2004
Posts: 3,472
Likes: 18
From: Lake Ozark, MO
What are you building??specs on the motor?? What kind of idle/driveability do you want? Maybe we can point you in the right direction with what has worked for us
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Le Mans Master
Joined: Feb 2004
Posts: 8,629
Likes: 16
From: York PA
I had asked (provided info on motor) in previous and got an overwhelming response to use Chris's cam at ECS. So I decided o go that route until I coulnd't get any info. Again like I said above if they are as good as the forum says they are may I don't need to know what I'm getting....
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
We dont give out exact specs but we tell everyone the same thing. The duration is in the 220's and lift is well below the 600 mark. The cam drives like stock and makes tons of power. We understand that some people might not want to buy it because we are secretive with the specs and we are to a certain point. The bottom line it thats its the most streetable cam and makes the most power. We have many cars running in the 9's to back this up.. Listen to some of the idle clips on line as well and you will see how docile it it. Hope this helps clear things up..
Race Director
Joined: Nov 2001
Posts: 18,682
Likes: 4
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12
I have ECS blower cam for my 99% street car that has also ran 10s on the track with street tires. It is very stealthy. I would do it again in a heartbeat.
Do a search over You Tube and you can find my car with this cam idling etc
Do a search over You Tube and you can find my car with this cam idling etc
Former Vendor
Joined: Feb 2004
Posts: 10,876
Likes: 8
From: Las Vegas NV
St. Jude Donor '06 & '12
IMHO cams should not be bought off of a name, part number, or popularity.
The cam chosen should be based off of your EXACT specs. Motor size, compression, gears, tranny, driving style, head size, head flow, type of power adder, and overall way of how you want it to run, should determine what you buy.
Just because Nike Air Jordans are the best basketball shoe, doesnt mean everyone buys the same size as Michael Jordan wears...
Cams are tooooo important to buy based off of a trademarked name..
That being said, I do not feel ECS should ever give up their specs. They race wayyyy to much, spent a fortune in testing, and have wayyy to many people trying to copy what they do.. $419.00 is an awesome price.
The cam chosen should be based off of your EXACT specs. Motor size, compression, gears, tranny, driving style, head size, head flow, type of power adder, and overall way of how you want it to run, should determine what you buy.
Just because Nike Air Jordans are the best basketball shoe, doesnt mean everyone buys the same size as Michael Jordan wears...
Cams are tooooo important to buy based off of a trademarked name..
That being said, I do not feel ECS should ever give up their specs. They race wayyyy to much, spent a fortune in testing, and have wayyy to many people trying to copy what they do.. $419.00 is an awesome price.
I had asked (provided info on motor) in previous and got an overwhelming response to use Chris's cam at ECS. So I decided o go that route until I coulnd't get any info. Again like I said above if they are as good as the forum says they are may I don't need to know what I'm getting....
Race Director
Joined: Jul 2005
Posts: 11,201
Likes: 982
From: Think BEFORE hitting "Submit Reply"
I can assure you thats not the reason. We sell all our own custom cams for $419.. I would venture to guess if you call comp the price will be in the $400 range, possibly more.
We dont give out exact specs but we tell everyone the same thing. The duration is in the 220's and lift is well below the 600 mark. The cam drives like stock and makes tons of power. We understand that some people might not want to buy it because we are secretive with the specs and we are to a certain point. The bottom line it thats its the most streetable cam and makes the most power. We have many cars running in the 9's to back this up.. Listen to some of the idle clips on line as well and you will see how docile it it. Hope this helps clear things up..
We dont give out exact specs but we tell everyone the same thing. The duration is in the 220's and lift is well below the 600 mark. The cam drives like stock and makes tons of power. We understand that some people might not want to buy it because we are secretive with the specs and we are to a certain point. The bottom line it thats its the most streetable cam and makes the most power. We have many cars running in the 9's to back this up.. Listen to some of the idle clips on line as well and you will see how docile it it. Hope this helps clear things up..
At some point I am going to do a cam.
Still all stock LS6 with TT.
Would your cam work well in my application with the TT's?
Thanks for any help.
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,224
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
We have a different cam for your build, give us a buzz when your ready.
Guys,
some people do not like that we do not indulge our cam specs, but at the end of the day our blower cams are one of, if not the, most proven set ups on this board. Sorry if we will not give away years of testing so it can be copied, especially since we sell the cams for basically the same price as if you called Comp for an off the shelf cam.