C6 Corvette General Discussion General C6 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by: Feral Industries

How do you remove the C6 center caps on the wheels?

Thread Tools
 
Search this Thread
 
Old Apr 2, 2017 | 12:02 PM
  #1  
surburban99's Avatar
surburban99
Thread Starter
Burning Brakes
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2005
Posts: 1,163
Likes: 21
From: Roanoke and Fieldale VA
Default How do you remove the C6 center caps on the wheels?

Hello, When I had new tires installed on my C6, I noticed that the wheel center cap flags are not correct. The point of the "flag" is supposed to point at the valve stem.

Mine are the 2007 chrome factory wheels

I want to correct this, so do I have to remove the lug nuts to remove and center the cap? Or, how do I remove and center the caps?

Sorry guys, just my OCD kicking this today!

Last edited by surburban99; Apr 2, 2017 at 12:06 PM.
Reply
Old Apr 2, 2017 | 12:10 PM
  #2  
EVRose's Avatar
EVRose
Race Director
10 Year Member
 
Joined: Oct 2010
Posts: 14,475
Likes: 785
From: Las Vegas NV
Default

They snap on. Stick something in the gab and pry it off.
Reply
Old Apr 2, 2017 | 12:16 PM
  #3  
TorchRedFred's Avatar
TorchRedFred
Le Mans Master
Community Builder
Liked
Community Favorite
Top Answer: 1
 
Joined: Jan 2017
Posts: 6,134
Likes: 1,962
From: Morris County New Jersey
Default

I use gorilla tape or any strong tape. Pinch the center of the tape together, then apply to center cap, then grab the pinched part with plyers and jank.

Reply
Old Apr 2, 2017 | 12:18 PM
  #4  
surburban99's Avatar
surburban99
Thread Starter
Burning Brakes
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2005
Posts: 1,163
Likes: 21
From: Roanoke and Fieldale VA
Default

Originally Posted by TorchRedFred
I use gorilla tape or any strong tape. Pinch the center of the tape together, then apply to center cap, then grab the pinched part with plyers and jank.

I have a different center cap than the one in your photo. Mine is almost like a five point star etc.? It is the stock factory wheel.
Reply
Old Apr 2, 2017 | 12:22 PM
  #5  
TorchRedFred's Avatar
TorchRedFred
Le Mans Master
Community Builder
Liked
Community Favorite
Top Answer: 1
 
Joined: Jan 2017
Posts: 6,134
Likes: 1,962
From: Morris County New Jersey
Default

The wheel pictured is the stock chrome grand sport wheel.

Same procedure should work on your center cap. I believe they just get pushed into place and need to get popped out. Using the tape helps to make sure nothing gets scratched.

Last edited by TorchRedFred; Apr 2, 2017 at 12:25 PM.
Reply
Old Apr 2, 2017 | 12:24 PM
  #6  
EVRose's Avatar
EVRose
Race Director
10 Year Member
 
Joined: Oct 2010
Posts: 14,475
Likes: 785
From: Las Vegas NV
Default

Originally Posted by surburban99
I have a different center cap than the one in your photo. Mine is almost like a five point star etc.? It is the stock factory wheel.
You have the same one I have. They snap on.
Reply
Old Apr 2, 2017 | 12:35 PM
  #7  
TorchRedFred's Avatar
TorchRedFred
Le Mans Master
Community Builder
Liked
Community Favorite
Top Answer: 1
 
Joined: Jan 2017
Posts: 6,134
Likes: 1,962
From: Morris County New Jersey
Default

Originally Posted by EVRose
They snap on. Stick something in the gab and pry it off.

Or this. Looked at a picture of the standard wheels. They are like a star style design. They look easy enough to take off. The tape trick might not be necessary or not the best choice.
Reply
Old Apr 2, 2017 | 12:49 PM
  #8  
jft69z's Avatar
jft69z
Drifting
Supporting Lifetime
10 Year Member
Veteran: Air Force
Liked
Top Answer: 1
 
Joined: Nov 2011
Posts: 1,843
Likes: 330
From: western NY
Default

Pop the wheel off & from the back side use a screwdriver handle & give the center cap a tap. It will pop right off. Simple.
Reply
Corvette Stories

The Best of Corvette for Corvette Enthusiasts

story-0

8 Most "Only Corvette Owners Understand" Quirks and Problems

 Pouria Savadkouei
story-1

10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

 Joe Kucinski
story-2

How Much Horsepower Every Corvette Engine "LOST" in 1972

 Joe Kucinski
story-3

Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

 Michael S. Palmer
story-4

Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

 Joe Kucinski
story-5

150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

 Joe Kucinski
story-6

8 Coolest Corvette Pace Cars (and Replicas) of All Time

 Verdad Gallardo
story-7

Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)

 Joe Kucinski
story-8

Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!

 Verdad Gallardo
story-9

Top 10 Corvettes Coming to Mecum Indy 2026!

 Brett Foote
Old Apr 2, 2017 | 12:51 PM
  #9  
surburban99's Avatar
surburban99
Thread Starter
Burning Brakes
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2005
Posts: 1,163
Likes: 21
From: Roanoke and Fieldale VA
Default

Thanks to all that replied, I got them off with a nylon trim tool. They popped right off, and I have centered the caps. Life is good now.

This forum is great!
Reply
Old Apr 2, 2017 | 02:32 PM
  #10  
RagTop69's Avatar
RagTop69
Melting Slicks
15 Year Member
 
Joined: Aug 2005
Posts: 2,821
Likes: 204
From: Lincoln CA
Default

I heard of a guy who would jack his car up at shows and rotate the tires so the white letters were all aligned. I thought that was pretty OCD, but the direction of the tips of the Corvette flags relative to the valve stem would have never crossed my mind in a million years. Seek help.
Reply
Old Apr 2, 2017 | 10:59 PM
  #11  
buckmeister2's Avatar
buckmeister2
Le Mans Master
Liked
Loved
Community Favorite
Top Answer: 1
 
Joined: May 2015
Posts: 5,187
Likes: 1,216
From: Las Vegas Nevada
Default

Originally Posted by RagTop69
I heard of a guy who would jack his car up at shows and rotate the tires so the white letters were all aligned. I thought that was pretty OCD, but the direction of the tips of the Corvette flags relative to the valve stem would have never crossed my mind in a million years. Seek help.
He did "seek help"...and we fixed it for him...
Reply
Old Apr 2, 2017 | 11:55 PM
  #12  
owc6's Avatar
owc6
Team Owner
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2013
Posts: 26,228
Likes: 4,356
From: Chirper Island
Default

You can also wrap dental floss around (and under the caps) to pop them off.

Easy peasy!
Reply
Old Apr 3, 2017 | 04:42 AM
  #13  
Bob Paris's Avatar
Bob Paris
Safety Car
Supporting Lifetime
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2013
Posts: 4,408
Likes: 3,485
From: Granada Hills CA
Default

When I "rotated" the tires side-to-side I took the opportunity to correctly orient the center caps. Over the following months, the caps would rotate on their own and end up out of position - so I no longer bother.
Reply
Old Apr 3, 2017 | 07:22 AM
  #14  
Mike2013's Avatar
Mike2013
Team Owner
20 Year Member
St. Jude 20 Year Donor
Liked
Community Favorite
 
Joined: Jul 2003
Posts: 25,236
Likes: 451
From: Sun Coast of Florida
St. Jude Donor '03-'26
Default

Originally Posted by surburban99
Hello, When I had new tires installed on my C6, I noticed that the wheel center cap flags are not correct. The point of the "flag" is supposed to point at the valve stem.

Mine are the 2007 chrome factory wheels

I want to correct this, so do I have to remove the lug nuts to remove and center the cap? Or, how do I remove and center the caps?

Sorry guys, just my OCD kicking this today!
And I thought I had OCD!
Reply
Old Apr 3, 2017 | 08:48 AM
  #15  
LUVMINE's Avatar
LUVMINE
Le Mans Master
Supporting Lifetime
St. Jude 10 Year Donor
20 Year Member
Liked
Loved
 
Joined: Jan 2005
Posts: 6,200
Likes: 233
From: "Nowhere Man"
St. Jude Donor '13-'14-'15-'16-'17-'18-'19-'20-'21-'22
Default

I had a 2007 with the OEM painted wheels and this is what I used. It's a paint can opener.

You carefully insert it in the lug opening and catch the back of the cap and pull forward.

Sorry, didn't realize you got them off.
Attached Images  

Last edited by LUVMINE; Apr 3, 2017 at 09:02 AM.
Reply
Old Apr 3, 2017 | 10:08 AM
  #16  
FortMorganAl's Avatar
FortMorganAl
Le Mans Master
All Eyes On Me
Liked
Loved
Community Favorite
 
Joined: Feb 2007
Posts: 8,514
Likes: 235
From: Currently somewhere in IL,IN,KY,TN,MO,AR,MS,AL, or FL
Default

With the 6 pointed ones I just grab a point with my fingers and pull it off. And, yes, the arrow is supposed to point to the valve stem unless you really don't care how your car looks.
Reply
Old Apr 3, 2017 | 01:29 PM
  #17  
EVRose's Avatar
EVRose
Race Director
10 Year Member
 
Joined: Oct 2010
Posts: 14,475
Likes: 785
From: Las Vegas NV
Default

Originally Posted by FortMorganAl
With the 6 pointed ones I just grab a point with my fingers and pull it off. And, yes, the arrow is supposed to point to the valve stem unless you really don't care how your car looks.
I probably don't care but I'm not sure.
Reply

Get notified of new replies

To How do you remove the C6 center caps on the wheels?

Old Apr 3, 2017 | 01:43 PM
  #18  
MH663's Avatar
MH663
Burning Brakes
 
Joined: Jul 2014
Posts: 781
Likes: 84
From: Dayton OH
Default

Originally Posted by RagTop69
I heard of a guy who would jack his car up at shows and rotate the tires so the white letters were all aligned. I thought that was pretty OCD, but the direction of the tips of the Corvette flags relative to the valve stem would have never crossed my mind in a million years. Seek help.
He's still on here.
Reply
Old Apr 5, 2017 | 10:59 PM
  #19  
ByRiver's Avatar
ByRiver
Safety Car
 
Joined: Oct 2015
Posts: 4,128
Likes: 616
From: St Louis Area IL
Default

Originally Posted by surburban99
The point of the "flag" is supposed to point at the valve stem.

...

Sorry guys, just my OCD kicking this today!

My OCD says I have to see the document that says the flag is "supposed" to point a certain way. Anyone have a link?
Reply
Old Apr 6, 2017 | 08:31 AM
  #20  
FortMorganAl's Avatar
FortMorganAl
Le Mans Master
All Eyes On Me
Liked
Loved
Community Favorite
 
Joined: Feb 2007
Posts: 8,514
Likes: 235
From: Currently somewhere in IL,IN,KY,TN,MO,AR,MS,AL, or FL
Default

https://www.corvetteforum.com/forums...evolution.html
https://www.corvetteforum.com/forums...or-detail.html
https://www.corvetteforum.com/forums...post1555278748
https://www.corvetteforum.com/forums...post1589768539
https://www.corvetteforum.com/forums...post1586522956


Last edited by FortMorganAl; Apr 6, 2017 at 08:32 AM.
Reply



All times are GMT -4. The time now is 07:19 PM.

story-0
8 Most "Only Corvette Owners Understand" Quirks and Problems

Slideshow: These are the quirks, annoyances, and oddly lovable problems that every Corvette owner eventually learns to live with.

By Pouria Savadkouei | 2026-05-28 09:31:39


VIEW MORE
story-1
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

Slideshow: 10 reasons why the C6 Z06 is still a performance benchmark after 20 years.

By Joe Kucinski | 2026-05-27 17:20:09


VIEW MORE
story-2
How Much Horsepower Every Corvette Engine "LOST" in 1972

Slideshow: How much horsepower every Corvette engine lost in 1972.

By Joe Kucinski | 2026-05-27 16:54:53


VIEW MORE
story-3
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

Slideshow: How to Protect A Convertible Top: 10 DOs & DON'Ts

By Michael S. Palmer | 2026-04-03 00:00:00


VIEW MORE
story-4
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

Slideshow: The 10 most explosive Corvettes ever built based on power-to-weight ratio.

By Joe Kucinski | 2026-05-20 07:23:03


VIEW MORE
story-5
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

Slideshow: From C1 to C8 we compare every Corvette generation by the numbers.

By Joe Kucinski | 2026-05-12 16:54:12


VIEW MORE
story-6
8 Coolest Corvette Pace Cars (and Replicas) of All Time

Slideshow: Some Corvette pace cars became collectible legends, while others perfectly captured the look and attitude of their era.

By Verdad Gallardo | 2026-05-11 09:50:51


VIEW MORE
story-7
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)

Slideshow: Ranking the top 10 Corvette engines by torque output.

By Joe Kucinski | 2026-05-05 11:58:09


VIEW MORE
story-8
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!

Slideshow: A Corvette pace car nearly matching IndyCar speeds sounds exaggerated, until you look at the numbers.

By Verdad Gallardo | 2026-05-04 20:03:36


VIEW MORE
story-9
Top 10 Corvettes Coming to Mecum Indy 2026!

Among a rather large group of them.

By Brett Foote | 2026-05-04 13:56:44


VIEW MORE