When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
https://www.summitracing.com/parts/bsp-86420
It doesn't look to do it but there are some reviews from Corvette owner's
Anyone here that has it ?
I'm looking for a pulley that fits the standard pump
Although that description say either keyway or press-on, if you check on billet specialties site it'll be for a long pump, press-on shaft NOT a keyed shaft pump.
(just went through a tone of pulley info looking to replace my double with a single pulley)
86120 is the single keyed shaft pulley, can't tell you if it lines up on a SB
M
Seems to be hard to find a pulley for a short pump and without ac, the most ones are to the ones with ac and they doesn't look the same..
Maybe I should get it powdercoated in aluminum color instead
Just looked up the deep groove pulley part number from my notes on my power steering pump:
Power steering pulley (deep)(GM)
3834720
This is a key slotted pulley. As cheap as 60 bucks on ebay as of the date of this post.
Does your pump shaft have a key/keyway?
I think that's what he already has and he's looking to change it to something better looking. I could be taking it totally wrong though in which case the info I gave is more useless than normal
M
Yeah, I'm a bit confused ....but as long as I did the research... it looks like the 1974 SBC Corvette PS Pulley was 3770509 per this reference: http://gmpartswiki.com/getpage?pageid=39417
Last edited by carriljc; Feb 15, 2018 at 11:10 AM.
Reason: corrected typed-in part number AND replaced fuzzy image
You could polish yours with sanding discs to a smooth finish then apply primer and paint or all in one primer paint. It's not a bad looking three spoke design IMO.
These 3M sanding roloc discs make short work of it.
Brake cleaner and de-lint prior to shooting.
This is good>>>
This is not>>>
Last edited by jimvette999; Feb 16, 2018 at 09:46 AM.
Does this steering pump pulley fit?
